Description
BUY MK48Z02BU-25 https://www.utsource.net/itm/p/637358.html
CMOS 8K x 8 ZEROPOWER SRAM
| Parameter |
Description |
Value |
Unit |
| Part Number |
Full part identification |
MK48Z02BU-25 |
- |
| Memory Type |
Type of memory |
SRAM |
- |
| Capacity |
Storage capacity |
2 Mbit |
bits |
| Organization |
Data organization |
262,144 x 8 |
- |
| Supply Voltage (Vcc) |
Operating supply voltage range |
1.7 to 3.6 |
V |
| Standby Current |
Current consumption in standby mode |
0.1 |
μA |
| Active Current |
Current consumption in active mode |
3.0 |
mA |
| Access Time |
Time required for data access |
25 |
ns |
| Operating Temperature |
Temperature range for operation |
-40 to +85 |
°C |
| Package Type |
Type of packaging |
SOIC-8 |
- |
| Pin Count |
Number of pins |
8 |
- |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (Vcc) is within the specified range of 1.7 to 3.6 volts.
Connection:
- Connect the Vcc pin to your power supply and GND pin to ground.
- Ensure all other pins are connected as per the datasheet diagram.
Operation:
- For optimal performance, operate within the specified temperature range (-40°C to +85°C).
- The device supports standard read and write operations typical for SRAM devices.
Handling:
- Handle with care to avoid static damage; use appropriate ESD protection measures.
- Follow manufacturer guidelines for soldering and mounting to ensure reliability.
Standby Mode:
- To enter standby mode, set the chip select pin low and ensure minimal current draw by following the standby current specifications.
Access Timing:
- Ensure that your system's timing requirements match the 25ns access time to prevent data corruption or loss.
(For reference only)
More detail about Utsource Holding Company Limited
