This all in one vertical system integrates a 5kW pure sine wave inverter and a 5.12kWh LiFePO battery into a single compact enclosure. With a plug and play design, installation is quick and space saving. The system supports off grid and hybrid output modes, features an MPPT solar charge controller (max PV array power 5,500W, max open circuit voltage 500Vdc), and delivers a maximum solar charging current of 100A plus grid/generator charging current of 60A. It can be used as a standalone unit or expanded in parallel – up to 2 inverters (10kW total) and up to 4 battery modules (20.48kWh total). Ideal for home backup, solar self consumption, off grid systems, and small commercial storage.
Key Features
Compact All in One Design: Inverter module (INV05KLP1-V5.0) and battery module (51.2V 100Ah, 5.12kWh) are housed together – minimal wiring and footprint.
Flexible Output Modes: Supports off grid and hybrid operation, automatically switching between grid, PV, and battery power.
High Power Output: Rated output power 5,000W, peak 10,000VA – capable of driving 4HP motor loads, handling home appliances and small equipment.
Efficient PV Charging: Single MPPT with 5,500W max PV array power and 100A max charging current for high solar utilization.
Expandable Capacity: Single battery module 5.12kWh, supports up to 4 units in parallel for a total of 20.48kWh; up to 2 inverters in parallel for 10kW total power.
Long Cycle Life: ≥6,000 cycles @80% DOD, 0.5C, 25°C; cells certified to IEC62619.
Intelligent BMS with Full Protection: Integrated BMS provides over charge, over discharge, over current, over temperature, short circuit protection, and fault detection.
Multi source Charging: Supports PV charging and grid/generator charging (can operate simultaneously), prioritizing solar energy.
LCD Display: Dynamically shows system operating status (voltage, current, power, SOC, etc.).
APP Real Time Monitoring: Remote data viewing and parameter adjustment via smartphone APP – easy management and maintenance.
Safety Certifications: Battery certified to UN38.3, MSDS, IEC62619:2017; system complies with EN IEC61000 3 2, EN IEC61000 6 1, RoHS.
Applications
Residential PV storage, home backup power, off grid systems (e.g., remote cabins, telecom base stations), small shop storage, rural grid improvement.
