Deskripsi
Art.Nr. 050595
Application
- Removal of all common paints incl. 2K, epoxy, EC and powder coatings. Removal of sealing residues on screw joints, lids, flanges and engine blocks.
- Removal of diesel effect, plastic and paint residues on metallic surfaces of tools and moulds in injection moulding machines, extrusion and film lines.
Properties
- Clean application
- Evaporates slowly and almost without residues
- Ideal remover of sealings
- Removes even hardest paints
- Solves brownish diesel residues
- Applicable also with galvanized material, aluminium and aluminium alloys
- Economical in consumption
Instructions
- Spray generously on the parts to be treated.
- Attention: dissolves elastomers, plastics, paints and sealings. If required, carry out precaution measures on the machines (e.g. painted parts, hydraulic hoses etc.).
- If parts are heavily soiled, repeat the cleaning process.
- Cleaning time depends primarily on the grade of contamination of the parts.
- Subsequent cleaning with CLEAN-AN/U is recommended.
- The minimum shelf life in original sealed containers, stored in a cool and dry place (no direct sunlight) is about 2 years.
- Due to the variety of applications, we highly recommend to always carry out corresponding tests prior to general use.
| Technical Data |
|
|
| Optics |
Colourless |
|
| Basis |
Different solvents |
|
| Density, 20°C |
0.75 g/cm³ |
EN ISO 3675 |
| Flash point, COC |
<-20 °C |
DIN EN ISO 2592 |
| Temperature range |
-10 - +40 °C |
|
All information stated is intended to guide preliminary product selection only. The above information is neither an assurance of product properties nor is it a general statement of fitness for use in the listed applications. Please consult with our technical staff about your specific use case and technical parameters.
Lihat detail lebih lanjut tentang Pensmore Sdn Bhd