In the high-density urban areas of Kuala Lumpur and Selangor, drift eliminators are the final defense against water loss and environmental contamination. Drift is the "mist" or small droplets of treated cooling water that get pulled out of the tower by the fan's discharge. Without efficient eliminators, your facility faces high water bills, chemical wastage, and the risk of spreading Legionella aerosols into the surrounding city air.
EKG M&E Sdn Bhd specializes in Drift Eliminator Efficiency Optimization, ensuring your cooling tower retains its water and chemicals while maintaining low static pressure for the fan motor.
As an HVAC and Clean Air Specialist, we focus on the "inertial impaction" of water droplets. As air travels through the eliminator's specialized "S-shaped" or "Chevron" paths, the heavier water droplets cannot change direction as fast as the air. They hit the walls of the eliminator and drain back into the tower.
Cellular (Blade) Type: These provide a high-surface-area path with multiple "turns" for the air. Modern PVC cellular eliminators can reduce drift loss to less than 0.001% of the circulating water flow.
Pressure Drop Management: High-efficiency eliminators must balance water capture with airflow. If they are clogged or poorly designed, the fan motor must work harder, causing the Variable Frequency Drive (VFD) to draw more power.
In the Klang Valley, cooling tower drift eliminators often fail due to the harsh tropical sun and lack of maintenance:
UV Degradation: Standard PVC becomes brittle and "shatters" over time. Gaps in the eliminator bank allow "geysers" of water to escape, which can damage nearby rooftop equipment and increase the risk of building structural rust.
Scaling and Bio-fouling: Just like the Infill, eliminators can become "choked" with calcium and algae. This increases the "Static Pressure," which can cause your fan motor to trip or run at high temperatures.
Improper Seating: If the eliminators are not perfectly fitted to the tower casing, air will take the path of least resistance through the gaps. This "Air Bypass" carries massive amounts of drift out of the tower.
We restore the environmental safety and water efficiency of your cooling tower through a structured engineering approach:
Precision Gap Sealing: We don't just "lay" the eliminators in. We ensure every bank is tightly fitted with specialized gaskets or spacers to eliminate bypass air.
Aerodynamic Cleaning: We use low-pressure chemical cleaning to remove scale from the "Chevrons" without damaging the delicate PVC structure.
VFD Airflow Tuning: After optimizing the eliminators, we recalibrate the VFD and Fan Pitch. This ensures the fan is moving the maximum volume of air at the lowest possible energy cost, now that the "breathing" path is clear.
| Feature | Damaged / Clogged Eliminators | EKG M&E Optimized System |
| Water Loss | High (Visible mist/rain). | Minimal (0.001% Drift Rate). |
| Chemical Usage | High (Frequent top-ups needed). | Low (Retained in the system). |
| Static Pressure | High (Fan motor strain). | Low (Maximum Airflow Efficiency). |
| Legionella Risk | Dangerous (Aerosolized droplets). | Managed (Physical Barrier). |
High-Grade Materials: We supply UV-stabilized, fire-retardant (ASTM E-84) eliminators designed to withstand the Malaysian climate for over 10 years.
Total System Integration: We ensure the eliminators are synchronized with your Spray Nozzles to prevent "Impingement" damage where water hits the blades too hard.
Strategic Support: Based in Kuala Lumpur, we provide turnkey replacements, Vibration Analysis, and 24/7 emergency repairs for commercial and industrial facilities.
Malaysia
