An Office Airflow Testing protocol is the primary method for diagnosing "Sick Building Syndrome" in high-density corporate environments. In Kuala Lumpur’s tropical climate, stagnant air is not just uncomfortable; it is a breeding ground for mold and a trap for CO2. If your office feels "heavy" or "stuffy," your ventilation system is likely failing to reach the "Dead Zones" where your employees spend 8 hours a day.
As part of a Ventilation Systems Audit, EKG performs these tests to map the movement of every cubic meter of air, ensuring your fans are optimized for both health and energy efficiency.
We look beyond the thermostat to find the mechanical reasons for poor air quality:
Diffusion Efficiency: We test if the air from your ceiling diffusers is actually reaching the "Breathing Zone" (3 to 6 feet from the floor) or if it is simply "short-circuiting" back into the return vents.
CO2 Clearance Rates: We measure how fast your system can "flush" a meeting room after a high-occupancy event.
Draft vs. Stagnation: We identify "Drafty Zones" (where air speed is too high and causes discomfort) and "Stagnant Zones" (where air velocity is below 0.10 m/s).
Cross-Contamination Check: We ensure that air from "dirty" areas (pantries or photocopier rooms) is being exhausted out, rather than being recirculated into the open-plan office.
Our engineers use medical-grade and industrial sensors to "see" the air:
Balometer Flow Hood Testing: We place a calibrated hood over your ceiling diffusers to measure the exact volume (CFM) of air delivered. We often find a 20 percent deviation between what the BMS says and what the room actually receives.
Thermal Anemometry: We use "Hot-Wire" sensors to measure very low air velocities at desk level. This confirms if the "Air Change per Hour" (ACH) meets 2026 DOSH (JKKP) standards.
Smoke-Tracer Visualization: For complex open-plan layouts, we use non-toxic smoke pencils to visually trace the air path, identifying "Turbulence" or "Air Traps" caused by office partitions.
VFD Frequency Calibration: We audit your Variable Frequency Drive (VFD). We find the minimum frequency (Hz) required to maintain airflow at the furthest desk, preventing "Over-Flow" waste.
Office airflow testing is the foundation of "Precision Cooling." Most offices are over-ventilated in some areas to compensate for poor airflow in others.
Speed Balancing: By fixing a simple damper or cleaning a diffuser, we can often lower the overall fan speed without losing comfort.
The Logic: Because of the Cube Law, a 20 percent reduction in fan speed results in a nearly 50 percent reduction in power consumption. Airflow testing provides the "Comfort Data" to safely lower your VFD frequencies.
| Measurement | Ideal Range (Healthy) | At-Risk Sign (Failure) |
| Air Velocity (at Desk) | 0.15 to 0.25 m/s | < 0.10 m/s (Stagnant) |
| CO2 Levels | 400 to 800 ppm | > 1100 ppm (Drowsiness) |
| Air Changes (ACH) | 4 to 6 per hour | < 2 per hour (Sick Building) |
| Diffuser Temperature | 14°C to 18°C | > 20°C (Cooling Failure) |
| Room Pressure | +2 to +5 Pascals | Negative (Sucking Humidity) |
Holistic Mechanical Focus: We don't just give you a report. We are experts in Mechanical Fan Overhauls, offering chemical degreasing of coils and fan balancing to "un-choke" your airflow.
VFD ROI Projection: We calculate exactly how much money you will save by "Right-Sizing" your airflow through VFD tuning.
Acoustic Comfort: Our testing ensures that your ventilation is quiet. We identify "Whistling" dampers and "Thumping" fans that distract employees.
Transparency: You receive a color-coded "Airflow Heat Map" of your office, showing exactly where your ventilation is Green (Healthy) or Red (Failing).
Malaysia
