In the dense commercial hubs of Kuala Lumpur and Selangor, a kitchen grease fire is one of the most significant risks to property and life. Standard ducting can buckle or fail within minutes of a flash fire, allowing flames to spread through walls and ceilings. EKG M&E Sdn Bhd provides specialized Fire-Rated Grease Ducting Installation, engineered to contain high-intensity fires and ensure your facility meets the stringent safety mandates of BOMBA Malaysia.
Our installation strategy focuses on the "Thermal Barrier" principle. We ensure that if a fire ignites within the duct, it stays trapped inside until the suppression system or fire department can extinguish it.
We don't use standard ventilation materials for grease extraction. Our systems are built to withstand extreme thermal expansion:
Heavy-Gauge Carbon or Stainless Steel: We utilize minimum 1.2mm to 1.6mm thickness steel, depending on the duct size, to prevent structural collapse during a high-temperature grease fire.
Continuously Welded Seams: Unlike standard ducts with "snap-lock" joints, fire-rated grease ducts are liquid-tight and continuously welded (Liquid-Tight Construction). This prevents flammable grease from leaking out and prevents fire from leaking in.
For ducts passing through protected corridors or multi-story buildings in the Klang Valley, we integrate high-performance insulation:
2-Hour Fire Rating: We apply specialized, non-combustible ceramic fiber fire-wrap or intumescent coatings that are certified to provide up to a 120-minute fire barrier.
Zero-Clearance Engineering: Our insulated systems allow for "Zero-Clearance" to combustibles, meaning the duct can safely pass through tight ceiling voids without the risk of igniting nearby timber or electrical trays.
As an HVAC and M&E Specialist, EKG ensures that the mechanical installation is as robust as the materials used:
TNB Energy & AC Preservation (VFD Sync):
Fire-rated ducting is often heavier and creates more static resistance. We utilize Variable Frequency Drives (VFDs) to calibrate the fan motor, ensuring that despite the heavy-duty ducting, your system only pulls the necessary amount of air, saving on TNB electricity and preventing your air conditioning from being wasted.
BOMBA Compliance & Access:
A fire-rated duct is useless if it cannot be cleaned. We install fire-rated, grease-tight Access Doors at every 3 meters and at every change of direction. This ensures professional degreasing can be performed, which is a mandatory requirement for passing annual BOMBA inspections and maintaining insurance validity.
Vibration & Expansion Control:
High-heat ducts expand. We use specialized heat-resistant hangers and vibration isolators to ensure that thermal expansion does not cause the duct to tear away from its supports or resonate noise through the building's masonry.
| Feature | Standard Kitchen Duct | EKG Fire-Rated Ducting |
| Material | Thin Galvanized Steel | Heavy-Gauge Carbon/Stainless |
| Joint Type | Slip-fit or Flanged | Continuous Liquid-Tight Weld |
| Fire Protection | None (Immediate Failure) | 2-Hour Certified Fire Barrier |
| Grease Seepage | Common at Joints | Zero Leakage Guarantee |
| Regulatory Status | Basic Health Code | Full BOMBA & MS 1472 Compliance |
Total Certification Support: We provide the necessary technical drawings and material certificates required for your building's Fire Certificate (FC) application.
Seamless Retrofits: We can wrap and upgrade existing ductwork to meet new fire safety codes without requiring a complete demolition of your kitchen.
Strategic Selangor Support: Based in Kuala Lumpur, we provide professional site measurements, 3D duct routing to optimize space, and expert installation for the Klang Valley’s most demanding commercial kitchens.
Is your kitchen duct a ticking fire hazard? Contact EKG M&E Sdn Bhd today for a professional fire-rated ducting audit and technical proposal.
Lihat detail lebih lanjut tentang EKG M & E SDN BHD
Malaysia
