LUXOR Pt Platinum Coater
The LUXOR Pt is a fully automated sputter coater specifically tailored for high-resolution applications in floor models and Field Emission Scanning Electron Microscopy (FE-SEM). Designed for imaging requiring magnifications of 50,000x and higher, it utilizes unique A² technology to coat samples in air or argon with a consistent layer of platinum, gold, or gold/palladium. This advanced system eliminates sample charging concerns while maintaining the highest level of resolution and contrast for demanding research environments.
Product Overview
Key Advantages
- Precision A² technology for uniform, homogeneous thin films
- Safety Safely enclosed high-voltage wires and connections
- Efficiency Pre-mounted targets; no thickness monitor required
- Operation Fully automated; press "Start" after thickness selection
Process Highlights
- Target Materials Pt (Argon), Au (Air/Argon), Au/Pd (Air/Argon)
- Process Modes Sputter, High Vacuum, & Drying Mode
- Coating Thickness Advised 5 to 15 nm (Pt, Au, Au/Pd)
- Cycle Time ~5 mins (based on 5nm Pt coating)
- Sample Capacity Up to 7 x 12.5 mm or 3 x 25 mm stubs
Innovative Features
A² Technology
Generates plasma with exceptional precision and control using intelligent, self-learning algorithms. This ensures stability and uniform metal coatings for higher resolution and contrast.
Triple Functionality
Beyond sputter coating, the system features a high vacuum mode for sample outgassing and a dedicated drying mode for soft, controlled sample dehydration.
Upside-Down Design
Uses gravity to draw larger particles toward the pump rather than the sample. This keeps the SEM column protected from debris and ensures a clean coating process.
User-Friendly Interface
An intuitive touch-screen interface allows lab personnel to operate the device with minimal training, significantly reducing the likelihood of human error.
Technical Specifications
| Category | Specification Detail |
|---|---|
| Applications | Coating with platinum, gold or gold/palladium in air or argon |
| Sample capacity | 7 x Ø 12.5 mm or 3 x Ø 25 mm |
| Sample holders | For pin stubs, cylindrical stubs, resin embedded samples up to 40mm diameter |
| Advised coating thickness | Platinum: 5 to 15nm – Gold or gold/palladium: 5 to 15 nm |
| Average process time | 5 minutes based on a 5 nm platinum coating – 10 nm gold or gold/palladium coating |
| Additional vacuum & dehydrating modes for outgassing and drying of sensitive samples | |
| Process time | 1 to 600 minutes (continuously selectable) |
| Coating chamber | Ø 100 mm diameter x 150 mm height |
| Gas supply | Environmental air (1 bar) or argon (0,6 bar) |
| Low energy dual stage pump | |
| Dimensions | 340 x 340 x 290 (mm, W x D x H) |
| Weight | 11 kg |
Versatile Applications
Materials Science
Analysis of polymers, filters, pharmaceuticals, textiles, and ceramics requiring high-resolution visualization.
Life Sciences
Coating sensitive biological specimens where heat sensitivity and morphology preservation are critical.
Advanced Quality Control
Product development and micromechanical analysis in electronics and high-performance coatings industries.
