In the dense urban corridors of Kuala Lumpur and Selangor, ventilation systems are often the primary path for fire and smoke to travel between building compartments. Fire Rated Ventilation refers to mechanical systems engineered to maintain structural integrity and contain hazardous elements during an emergency. EKG M&E Sdn Bhd provides high-performance, fire-rated installations that strictly adhere to BOMBA standards and the Uniform Building By-Laws (UBBL), ensuring your ventilation network is a safety asset rather than a liability.
Standard ventilation ducts are made of thin-gauge galvanized steel that can buckle or melt when temperatures exceed 200°C. Fire-rated systems must remain functional for at least 2 hours at temperatures reaching 250°C to 400°C.
To prevent a fire in one room from spreading through the ceiling ducting to another, we utilize systems rated for Stability, Integrity, and Insulation:
Stability: The duct and its reinforced support system must not collapse, keeping the airway open for smoke extraction.
Integrity: The system must be smoke-tight. We utilize BOMBA-approved intumescent sealants at every joint and wall penetration to block toxic gases.
Insulation: The duct must prevent radiant heat from igniting materials on the "cold side" of a fire barrier, such as electrical cables or structural timber.
Fire-Rated Enclosures: We apply certified high-density rockwool wraps or fire-rated boards to standard ductwork to provide a thermal shield.
Motorized Fire & Smoke Dampers (MFSD): These are integrated into your Fire Alarm Monitoring System (FAMS). They automatically seal off ventilation zones when smoke is detected, preserving the building's fire compartments.
High-Temperature Materials: For mission-critical paths, we utilize heavy-gauge steel and specialized coatings that resist thermal degradation.
As a BOMBA-Compliant M&E Specialist, EKG ensures that your safety infrastructure supports long-term efficiency:
TNB Energy Efficiency (The Airtight Advantage):
Fire-rated ventilation ducts are held to higher airtightness standards (Class C or D) than regular HVAC. This superior seal integrity minimizes static pressure loss during daily use. By eliminating air waste, your Variable Frequency Drive (VFD) can maintain required airflows at lower frequencies (Hz), resulting in a lower monthly TNB electricity bill.
EECA 2024 & Regulatory Compliance:
Under the Energy Efficiency and Conservation Act (EECA) 2024, every building service must be optimized. Our precision-sealed systems prevent the leakage of conditioned air into unconditioned ceiling voids, protecting your Building Energy Index (BEI).
Safe Evacuation & Tenability:
By effectively extracting smoke and maintaining compartmentation, our systems provide the "Golden Hour" needed for occupants to exit safely and for BOMBA personnel to navigate the building during rescue operations.
| Feature | Standard Ventilation | EKG Fire Rated Ventilation |
| Primary Goal | Occupant Comfort | Life Safety & Fire Containment |
| BOMBA Requirement | Not Required | Mandatory (FRL 120/120/120) |
| Max Temperature | < 200°C | 250°C to 400°C+ (2+ Hours) |
| Joint Sealing | Standard Mastic | Certified Intumescent Sealant |
| Support System | Standard C-Channel | Reinforced Fire-Rated Hangers |
Total 3D BIM Coordination: We utilize 3D modeling to route fire-rated ducts through crowded ceiling spaces, ensuring zero "clashes" with sprinklers, cable trays, or structural beams while maintaining mandatory fire separation.
Turnkey BOMBA Submission: We assist in the preparation of technical drawings and material data sheets required for Fire Certificate (FC) applications and annual renewals.
Strategic Regional Support: Based in Kuala Lumpur, we provide turnkey fire-rated services for shopping malls, data centers, hospitals, and high-rise office towers across the region.
Is your building’s ventilation network compliant and ready for an emergency? Contact EKG M&E Sdn Bhd today for a professional fire-rated ventilation audit and technical proposal.
More detail about EKG M & E SDN BHD
Malaysia