In the industrial zones of Kuala Lumpur and Selangor, fire safety is as critical as corrosion resistance. While standard FRP (Fiberglass Reinforced Plastic) is durable, it can be flammable without specific engineering. Flame-Retardant (FR) FRP Duct Fabrication utilizes specialized chemistries to ensure that exhaust systems handling hazardous fumes do not become fuel for a fire, meeting the stringent BOMBA (Fire and Rescue Department of Malaysia) and UL 181 safety standards.
EKG M&E Sdn Bhd specializes in the custom fabrication of FR-FRP ductwork, ensuring your facility remains protected while complying with DOSH and DOE mandates.
To achieve a flame-retardant rating, the fabrication process involves the integration of specific additives and resins that inhibit combustion.
Halogenated Resins: We utilize brominated vinylester resins which, when exposed to high heat, release gases that "starve" the flame of oxygen.
Antimony Trioxide Synergists: By adding antimony trioxide to the resin mix, we enhance the effectiveness of the halogenated components, creating a self-extinguishing material that ceases to burn once the ignition source is removed.
Heat Expansion: For high-risk areas, we apply an external intumescent gel coat. In a fire, this layer expands (chars) to create a carbonaceous insulating barrier, protecting the structural integrity of the duct and preventing the "wicking" of flames along the exhaust line.
As a specialized M&E contractor, EKG ensures your FR-FRP system supports both facility safety and EECA 2024 energy targets:
BOMBA & UL 181 Compliance:
Our FR-FRP ducting is fabricated to meet Class 0 or Class 1 flame spread and smoke development indices. This is critical for ducts passing through fire-rated compartments or ceiling voids in high-occupancy commercial and industrial buildings.
TNB Energy Efficiency (VFD Optimization):
The internal chemical barrier remains glass-smooth, minimizing air friction. This allows your Variable Frequency Drives (VFDs) to operate at optimal frequencies while maintaining target capture velocities, directly reducing your monthly TNB electricity bill.
Structural Durability (30+ Year Life):
Despite the fire-retardant additives, the duct retains the extreme corrosion resistance of FRP. It is immune to rust and pitting, providing a significantly longer service life than coated metal ducts in acid-rich environments.
| Feature | Standard FRP | EKG Flame-Retardant FRP | Coated Galvanized Steel |
| Fire Safety | Flammable | Self-Extinguishing (Class 0/1) | Non-combustible (but coatings may burn) |
| Corrosion Resistance | High | High (Chemical Inert) | Low (Coating failure leads to rust) |
| Smoke Development | High | Low (Engineered Resins) | Low |
| Structural Integrity | High | High (Reinforced Composite) | High (until rusted) |
| Joint Type | Laminated | Laminated (FR-Certified) | Gasketed / Screwed |
| Weight | Lightweight | Lightweight | Heavy |
Total 3D BIM Coordination: We model the FR-FRP paths in 3D to ensure perfect alignment with Fire Dampers, structural beams, and other mechanical utilities for a "clash-free" and safety-certified installation.
Turnkey Validation: We provide full technical data sheets (TDS) and material certifications required for BOMBA inspections and M&E consultant approvals.
Specialized Fabrication: Based in Kuala Lumpur, we provide professional fabrication for chemical plants, semiconductor cleanrooms, data centers, and laboratory facilities across Malaysia.
Is your chemical exhaust system a fire hazard? Contact EKG M&E Sdn Bhd today for a professional flame-retardant FRP duct fabrication audit and a technical proposal that prioritizes safety, durability, and compliance.
More detail about EKG M & E SDN BHD
Malaysia
