MS65 Screw Valve + 300ml Glue Dispenser (MS65-300ML)： Johor Bahru (JB), Malaysiaのトップチョイス SEM Equipment Sdn. Bhd.

説明

Model :

MS65-300ML

Features :

1. Volumetric fluid transport, the flow rate is not affected by pressure changes.
2. Closed-loop motor drive, high output accuracy.
3. The stator has excellent corrosion resistance and particle resistance.
4. The rotor is made of high-hardness material, making it more wear-resistant.
5. Suitable for colloids with viscosity ranging from low to high.
6. No dripping or stringing issues with glue dispensing.
7. Control supports RS232 communication and real-time monitoring of dispensing status.
8. Supports time mode, automatic mode, volume mode, automatic dispensing, and automatic back suction.

Applications :

Suitable for UV adhesives, red glues, sealing silicone, lubricating greases, conductive adhesives, epoxy adhesives,
Various types of single-component fluids, such as thermal grease.

Technical Paremters :

Input pressure	0~6 bar
Maximum output pressure	20 bar
Self-sealing ability	2 bar
Output accuracy	±1%
Flow	Max. 5.8 ml/min
Dispensing consistency	>99%
Minimum dispensing amount	0.004ml
Rotor material	SUS304/SUS316L/Zirconium Oxide Ceramics
Stator material	FFKM/PU/EPDM/NBR
Wetted part material	SUS304/POM/PTFE/PEEK/AL
Feed port	Ф6mm tubing, Luer fitting, G1/8 thread
Discharge port	Luer connector
Ambient temperature	10~40°C
Fluid viscosity	Medium and low viscosity fluids

詳細を見るSEM Equipment Sdn. Bhd.