説明
Model :
Features :
1. Volumetric fluid transport, the flow rate is not affected by pressure changes.
2. Closed-loop motor drive, high output accuracy.
3. The stator has excellent corrosion resistance and particle resistance.
4. The rotor is made of high-hardness material, making it more wear-resistant.
5. Suitable for colloids with viscosity ranging from low to high.
6. Monitoring and adjusting the A/B ratio to ensure no dripping or stringing issues during dispensing.
7. Supports full data monitoring, covering pressure, temperature, adhesive volume, etc.
8. Supports time mode, automatic mode, volume mode, automatic dispensing, and ratio control.
Applications :
This system is suitable for handling and dispensing the following two-component materials:
- Acrylic
- Epoxy
- Thermal conductive paste
Achievable Processes
It enables a wide range of precision bonding and application processes, including:
- Ceramic bonding
- Metal bonding
- Non-metal bonding
- Magnetic material bonding
- Sealing applications
- Thermal conduction (heat dissipation interfaces)
Typical Industry Uses
- Electronics and semiconductor manufacturing
- Automotive assembly and components
- Industrial equipment fabrication
- LED and power device thermal management
- Structural bonding in engineering applications
Technical Paremters :
| Input pressure |
0~6 bar |
| Maximum output pressure |
20 bar |
| Self-sealing ability |
2 bar |
| Output accuracy |
±1% |
| Flow |
Max. 18 ml/min |
| Minimum dispensing amount |
0.01ml |
| Fluid viscosity |
Medium to high viscosity fluids |
| Rotor material |
SUS304/SUS316L/Zirconium Oxide Ceramics |
| Stator material |
FFKM/PU/EPDM/NBR |
| Wetted part material |
SUS304/POM/PTFE/PEEK/AL |
| Feed port |
Ф6mm tubing, Luer fitting, G1/8 thread |
| Discharge port |
Standard mixing tube base (1:1/1:2/1:10) |
| Mixing ratio |
1:1~100:1 |
| Dispensing consistency |
>99% |
詳細を見るSEM Equipment Sdn. Bhd.
Malaysia
