ZapZoom 22kW AC Charger - Universal Type 2

ZapZoom 22kW AC Charger - Universal Type 2

Kategori: AC CHARGER Tersedia
Boleh Dibeli di Laman Web Rasmi
Untuk maklumat lanjut, lawati laman web rasmi kami di evhub.my

Penerangan

ZapZoom Wallbox EV Charger " IEC 62196-2 Type 2

ZapZoom 22kW AC EV Charger

One charger for todays single phase supply and tomorrows three phase upgrade.

ZapZoom 22kW AC Charger is a smart wallbox Type 2 EV charger designed for EV owners who want a reliable, safe and future-ready charging solution at home, office or commercial premises.

When your home has single phase supply, the charger can operate as a single phase charger. When your supply is upgraded to three phase, the same 22kW charger can be used for faster three phase charging, subject to your cars onboard charger and site electrical capacity.

This means you do not need to buy another charger later just because your electrical supply is upgraded.

Up to 22kW Single Phase Ready Three Phase Ready IEC 62196-2 Type 2 RFID Card App Control Dynamic Load Balance IP65

Why Choose a 22kW Charger Even If Your Home Is Single Phase?

Many landed homes in Malaysia are still supplied with single phase electricity. That is usually enough for normal home charging, but some EV owners may later upgrade to three phase for faster charging or larger home electrical demand.

The ZapZoom 22kW charger gives you this flexibility. It can be installed to suit your current supply and remain ready for future three phase charging.

Buy once. Charge today on single phase. Upgrade later to faster three phase charging without replacing the charger.

Final charging speed still depends on your electrical supply, charger setting, installation design and your EVs onboard AC charging limit.

Compatible with Most Type 2 EVs

ZapZoom uses the IEC 62196-2 Type 2 charging plug, which is widely used by EV models in Malaysia and globally.

EV

For Many Car Brands

Suitable for Type 2 EVs from BYD, ORA, Volvo, Mercedes-Benz, BMW, Hyundai IONIQ, Tesla and many other EV brands.

T2

IEC 62196-2 Type 2

Uses the common Type 2 AC charging standard, making it a practical and generic charger for different EV makes and models.

AC

AC Level 2 Charging

Designed for daily AC charging at homes, offices, commercial buildings and private parking bays.

Single Phase Today. 22kW Three Phase Tomorrow.

Single Phase Charging

For homes with single phase supply, the charger can operate at single phase charging power, commonly up to 7kW depending on electrical capacity and installation design.

Three Phase Charging

For premises with three phase supply, the charger can support up to 22kW charging, subject to site supply and the vehicles onboard AC charger.

Future Upgrade Friendly

Ideal for owners who currently have single phase supply but plan to upgrade their home or building to three phase later.

Smart Features for Daily Charging

APP

App Control

Start and stop charging, view historical charging records, select a charging schedule and set charging current.

RFID

RFID Card Control

Control charger access using RFID card to prevent unwanted or unauthorised charging.

OCPP

OCPP 1.6J Support

Supports OCPP 1.6J communication, suitable for projects that require third-party platform integration.

WiFi

Multiple Communication Options

Supports Bluetooth, Wi-Fi, Ethernet, 4G and RFID to meet different installation and user requirements.

DLB

Dynamic Load Balance

Supports dynamic load balancing with external smart meter, helping manage charging load and reduce overload risk.

LED

LED Indicator and Display

Built-in LED indicator and LED display make charging status easier to check at a glance.

Safety Protection Built In

EV charging involves high current. Proper protection is important for the vehicle, charger, home and user.

Type B Leakage Protection

Type B leakage protection with AC 30mA + DC 6mA residual current protection.

Over / Under Voltage Protection

Over-voltage and under-voltage protection with automatic recovery.

Over Current and Over Temperature

Second-level over-current and over-temperature protection for safer charging operation.

Ground and Surge Protection

Includes ground protection and surge protection to support safer electrical installation.

Relay-Sticking Protection

Helps detect and protect against relay sticking faults.

Optional PEN-Fault Protection

PEN-fault protection is available as an optional safety feature where required.

Built for Outdoor and Daily Use

IP65 Protection

IP65 rated enclosure for better protection in typical outdoor and semi-outdoor installation areas.

Flame-Retardant Housing

Thermoplastic shell with flame-retardant grade UL94V-0.

Quality Charging Cable

Halogen-free charging cable with pure copper core and TPU cable jacket.

Silver-Plated Plug Pins

Charging plug pins are pure copper with silver plating for reliable electrical contact.

4.5m Cable Length

Comes with a 4.5 meter charging cable. Customised cable length may be available depending on package.

Long Mechanical Life

Designed for more than 10,000 mechanical plug-in cycles.

Charging Time Guide

Charging time depends on the EV battery size, vehicle onboard AC charger, charger setting, site electrical supply and environmental conditions. The guide below gives approximate charging times from the brochure for selected EVs.

Vehicle Example Usable Battery 22kW 3 Phase 11kW 3 Phase 7kW 1 Phase
Tesla Model 3 Standard Plus 50.0kWh 2.27 hours 4.55 hours 7.14 hours
Tesla Model Y Performance 72.5kWh 3.29 hours 6.59 hours 10.36 hours
Volkswagen ID.4 77.0kWh 3.50 hours 7.00 hours 11.00 hours
Hyundai Kona Electric 64.0kWh 2.90 hours 5.80 hours 9.14 hours
BMW i3 120 Ah 37.9kWh 1.72 hours 3.44 hours 5.40 hours

Installation Service in Malaysia

ZapZoom EV Charger can be supplied with installation service from certified installers in Malaysia. Installation scope and final pricing depend on site condition, distance, cabling route and electrical requirements.

Zone 1

Klang Valley and Johor Bahru.

Zone 2

Penang, Johor, Melaka and Negeri Sembilan.

Zone 3

Other parts of East and West Malaysia, subject to installer availability and site confirmation.

Typical Installation Package Scope

The installation package can include the main charger installation and related electrical protection accessories. Final scope should be confirmed after site assessment.

Item Typical Installation Scope
Charger Installation Installation of EV charger, metal DB, RCBO and isolator.
Electrical Testing AC trip and DC trip test using Fluke Multifunction Tester 1664FC.
Cabling Up to 10 meters of 6.0mm PVC cable with PVC conduit, subject to package confirmation.
Additional Works Hacking, concealing, longer cable route, additional protection, civil works or other special works are charged separately based on job scope.

Technical Summary

Parameter ZapZoom Wallbox EV Charger Specification
Product Type Wallbox AC EV Charger
Charging Standard IEC 62196-2 Type 2
Charging Type Level 2 AC charging
Power Options 7kW, 11kW and 22kW models
22kW Charger Use Can operate with single phase supply at single phase charging power and with three phase supply up to 22kW, subject to installation and vehicle compatibility
Input Voltage 230Vac 15% for single phase; 380Vac 15% for three phase models
Rated Current 8 32A depending on model and setting
Charging Plug IEC 62196-2 Type 2
Cable Length 4.5 meters / customised option
Communication OCPP 1.6J, Bluetooth, Wi-Fi, Ethernet, 4G and RFID card
Smart Support Dynamic load balance and OCPP communication with third-party platform
User Interface LED indicator and LED display
Working Temperature -25C to +55C; -35C optional
Humidity 5% to 95% non-condensing
IP Rating IP65
Control Box Size L200 W200 H65mm
Net Weight SP220W2-T2: approximately 4.6kg
Warranty Up to 3 years warranty, subject to package and warranty terms

Product Summary

ZapZoom 22kW AC EV Charger is a future-ready Type 2 wallbox charger for EV owners who want one charger that can serve todays single phase home supply and tomorrows three phase upgrade.

With Type 2 compatibility, RFID control, app monitoring, OCPP 1.6J, Wi-Fi, Ethernet, Bluetooth, 4G, dynamic load balancing, IP65 enclosure and strong safety protection, ZapZoom is suitable for homes, offices and commercial EV charging applications.

ZapZoom 22kW Buy Once. Charge Now. Upgrade Later.

Contact us for charger selection, installation zone confirmation and quotation.

Lebih maklumat tentang Saturn Pyro EV Sdn Bhd
Saturn Pyro EV Sdn Bhd
Saturn Pyro EV Sdn Bhd Electric Car Charging Solution Malaysia, KL, EV Charger Supplier Selangor, Johor, Wallbox Charger Supply Penang, Melaka, Perak ~ Saturn Pyro EV Sdn Bhd