Spray Dryer (Large Capacity)(DL411C): Pilihan Utama di Selangor, Malaysia, Kuala Lumpur (KL), Puchong Renetech Sdn Bhd

Penerangan

Product Summary

Brand-new upgraded large spray dryer that efficiently recovers 100μm micro-particles.

Features

This device can obtain 10~100μm micro-particles, which are considered very difficult to obtain on laboratory spray dryer devices

Purposes of this device: It can be used in production preparatory experiments, high-value sample experiments, capsule spray drying method application research, and as an alternative method to traditional drying methods in general laboratories

It adopts a high-efficiency two-fluid nozzle spray method and a large drying chamber, compared with other products, the sample adhesion amount in the DL411C drying chamber is less, and the drying chamber is designed with a special cold air inlet to effectively prevent spray particles from refluxing and adhering upwards

The large hard glass drying chamber is very convenient for observing the spray and particles status

The nozzle head can automatically perform pulse cleaning at set intervals

The wide range of temperature settings for the hot air inlet can improve processing capacity and experimental efficiency

Specification

Feature	Specification
Model	DL411C
Applicable samples	Water-soluble & organic solvent (requires organic solvent recovery device)
Moisture evaporation capacity	Max. 3000ml/h
Spray and hot air contact method	Vertical downward spray and flow method
Liquid feed pump	Adjustable from 0 to 70 ml/min
Temperature setting range	0～300℃
Temp. adjusting accuracy	Inlet temperature ±1℃
Drying air volume adjustment range	0.12～1.0 m³/min
Spray air flow adjustment range	0～30L/min
Spray pressure range	0.3～0.6Mpa
Size Internal diameter	457 × height 975 mm (glass part)
Material	Drying chamber, cyclone unit, and product container: ultra-hard glass; piping: stainless steel and silicone
External output	Inlet temperature, outlet temperature output (4～20mA)
Temperature regulator	Multi-PID control
Touch screen	Temp regulation, blower, heater, liquid delivery pump, pulse jet switch, automatic needle cleaning, alarm, operational curve
Control switch	Inlet temperature, outlet temperature control switch
Temperature sensor	PT100 thermistor
Heater	2.0KW × 2
Spray air pump	External compressor (sold separately) or via GAS510C recovery device
Suction blower	Brushless Blower
Filter	Suction filter, exhaust filter
Solvent recovery	Using solvent recovery device GAS510C (sold separately)
Spray air connection	Joint outer diameter, Φ7mm
Exhaust vent diameter	Φ50mm
Safety functions	Overheating protection (inlet/outlet), pump reverse function, overcurrent leakage protection, independent heater overheat preventer
External dimensions	W1080 × D850 × H1770mm
Weight	Approx. 180kg
Power Source	200-230V ~ 50/60HZ 23-27A
Accessories	see Accessory llist for detail

Lebih maklumat tentang Renetech Sdn Bhd