|
Product Summary |
|
|
Power consumption reduced by over 30%, an environmentally friendly constant temperature oven that reduces CO2 emissions. |
|
|
|
|
Features |
|
|
Significantly reduces power consumption and features programmable functions in an environmentally friendly constant temperature oven |
|
Achieves a 30% energy-saving design (compared to previous products) during constant temperature operation through airtight thermal insulation in the chamber |
|
Maximum temperature reach time shortened by up to 15 min (compared to previous products) |
|
Standby time and recovery time are also reduced, achieving operational efficiency |
|
Able to implement various operating modes and is equipped with calibration correction functions, power failure reset mode selection, and user-defined information save and recall functions, among other support features |
|
Able to repeat program operation for up to 99 segments or 99 modes |
|
Equipped with accumulated function for powered/operating time |
|
Various optional features allow for system upgrades based on user needs |
|
Safety Features self-diagnostic circuits, independent overheating preventers with digital settings, overcurrent leakage protection, key locks, and other safety functions |
|
|
|
|
Specifications |
|
|
Specification Item |
Details |
|
Model |
DNE411C |
|
System |
Forced convection |
|
Operating temperature range |
Room temp.+10~210°C |
|
GB standard Temp. fluctuation |
±0.5℃ (at 210℃) |
|
Temp. uniformity |
±1.5% (at 210℃) |
|
Temp. adjustment accuracy |
±0.5℃ (at 210℃) |
|
Temp. distribution accuracy |
±2℃ (at 210℃) |
|
Max. temp. reaching time |
Approx. 60 min |
|
Interior material |
Stainless steel plate |
|
Exterior material |
Cold rolled steel plate with chemical proofing coating |
|
Insulating material |
Glass fiber |
|
Heater |
Stainless steel heating pipe 1.1KW |
|
Forced air motor |
High-temperature self-cooling motor 10W |
|
Cable port |
Inner diameter 33mm (one at upper right side) |
|
Intake vent |
Inner diameter 33mm (one at lower right side) |
|
Exhaust vent |
I.D. 33mm×2, located on the top |
|
Temp. control method |
PID control |
|
Temperature setting method |
Use special function menu keys and up/down keys to realize digital setting |
|
Setting temp. display |
Orange 5-digit LED digital display |
|
Timer |
1 min～99 hours 59 min / 1 min |
|
Operation functions |
Fixed temp. operation, auto start, auto stop, program operation |
|
Program mode |
Program operation max 99 segments, repeat operation function |
|
Additional functions |
Power/accumulated running time function (65535 hours), clock display, deviation correction function, cumulative power consumption, CO2 emission, heater output, cumulative power-on time, power failure recovery mode selection, user defined information login |
|
Sensors |
K thermocouple (Temp. controller and overheating protector) |
|
Safety device |
Self-diagnostic circuit (temperature sensor anomaly, heater disconnection protection, automatic overheating preventer, SSR short-circuit), overheating preventer, overcurrent leakage protection, key lock functions |
|
Internal dimensions (width × depth × height mm) |
450×450×450 |
|
External dimensions (width x depth x height mm) |
580×646×860 |
|
Remarks(dimensions) |
90L |
|
Shelf load |
15kg/ layer |
|
Shelf layers / shelf support spacing |
11 layers |
|
Support interval |
35mm |
|
Power Source |
AC220V 5.5A |
|
Weight |
Approx. 63kg |
|
Accessories |
Shelf Stainless punching mesh plate 2 pieces, Supports 4PCS |
Malaysia
