|
Product Summary |
|
|
Precision clean constant temperature oven with cleanliness level 100. |
|
|
|
|
Features |
|
|
This product suppresses particle generation and is suitable for constant temperature control in environments that require cleanliness, such as semiconductors, LCDs, electronic products, and precision instruments |
|
Featuring a high-temperature resistant HEPA filter, achieving high-performance temperature control through horizontal circulation, the C-type maintains cleanliness level 100 during constant temperature, while the UC-type maintains cleanliness level 100 throughout heating, constant temperature, and cooling |
|
A sensor is installed on the inner side of the HEPA filter to control the temperature in proximity to the item |
|
Designed for easy placement and retrieval of items |
|
Prevent dust from entering the chamber during door opening and closing |
|
Flow setting and introduction through N2 flow meter |
|
Equipped with self-diagnostic circuit (temperature sensor anomaly, heater disconnection protection, automatic overheating preventer, SSR short-circuit protection), overheating preventer, overcurrent leakage protection, key lock and other safety functions |
|
|
|
|
|
|
|
Specifications |
|
|
Specification Item |
Details |
|
Model |
DE630C |
|
System |
Forced convection |
|
Operating temperature range |
Room temp.+30~260℃ |
|
GB standard Temp. fluctuation |
±0.3℃（260℃) |
|
Temp. uniformity |
±1.5%（260℃) |
|
Temp. adjustment accuracy |
±0.3℃（at 260℃) |
|
Temp. distribution accuracy |
±2.5℃（at 260℃) |
|
Max. temp. reaching time |
Approx. 70 min (to 260°C) |
|
Interior material |
Stainless steel plate |
|
Exterior material |
Cold rolled steel plate with chemical proofing coating |
|
Insulating material |
Aluminosilicate cotton |
|
Heater |
Stainless steel heating pipe 3.6KW |
|
Fan blade/motor |
Centrifugal fan, high-temperature self-cooling motor 370w |
|
Differential pressure gauges |
Analog type 0～500Pa |
|
Cable port |
Internal diameter: 33mm×1, located on the right |
|
Additional mechanism |
Exhaust vent (manual) outer diameter: 60mm |
|
HEPA filter |
Dust collection efficiency: ≥99.95% for particles of 0.3 μm (DE430C/430UC, DE630C/630UC, DE430UC/DE630UC); ≥99.995% for particles of 0.1–0.2 μm (DT430UC/DT630UC) |
|
Controllers Temp. control method |
3-stage PID |
|
Temperature setting method |
Digital setting through special function menu keys and up/down keys |
|
Setting temp. display |
Red 4-digit LED digital display |
|
Timer |
1 min ~ 99 h 59 min and 100~999 h 50 min (including timer waiting function) |
|
Operation functions |
Fixed temp. operation, auto start, auto stop, program operation |
|
Program mode |
Program operation 6 modes with a total of 90 segments (30 segments×1, 15 segments×2, 10 segments×3) |
|
Additional functions |
Deviation correction, key lock, power failure compensation |
|
Sensors |
K thermocouple (temp. controller and overheating protector) |
|
Safety device |
Self-diagnostic circuit (temperature sensor anomaly, heater disconnection protection, automatic overheating preventer, SSR short-circuit), overheating preventer, overcurrent leakage protection, key lock functions |
|
Internal dimensions (W×D×H mm) |
600×600×600 |
|
External dimensions (W×D×H mm) |
850×1150×1738 |
|
N2 inlet interface |
Outer diameter: 8mm tapered joint |
|
Internal capacity |
216L |
|
Shelf load |
30kg/ layer |
|
Shelf layers / shelf support spacing |
17 layers/ 30mm |
|
Power Source |
3-phase AC380V 6.5A |
|
Weight |
Approx. 270kg |
|
Accessories |
Shelf Stainless steel wire mesh plate 3 pcs ,Supports 6 pcs |
Malaysia
