To save electricity on an Air Handling Unit (AHU) in 2026, you must align your technical upgrades with Malaysia's Energy Efficiency and Conservation Act (EECA) 2024, which became fully enforceable on January 1, 2025.
Large energy consumers (using >21,600 GJ annually) are now legally required to appoint a Registered Energy Manager (REM) and implement an Energy Management System (EnMS).
The most effective way to reduce AHU power consumption is to modulate airflow and upgrade motor efficiency.
VFD Retrofitting (The "Cube Law"):
By installing a Variable Frequency Drive (VFD) to reduce fan speed by just 20%, you can reduce the fan's power consumption by nearly 50%.
IE5 EC Fan Walls:
Replacing legacy belt-driven fans with IE5 Ultra-Premium Electronically Commutated (EC) fans eliminates the 2–5% energy loss caused by belt friction and pulleys.
Automated Demand Control Ventilation (DCV):
Integrate $CO_2$ and VOC sensors. The AHU will automatically slow down when rooms are empty or have low occupancy, preventing the expensive cooling of unoccupied spaces.
Your energy-saving measures must comply with the latest Malaysian standards to pass a BOMBA or Energy Commission (ST) audit.
MS 1525:2024:
Ensure your AHU meets the Specific Fan Power (SFP) limit of 1.6 kW per m³/s.
The "Fire Mode" Override:
Any VFD or speed-control device must be hard-wired to the Fire Alarm Monitoring System (FAMS). During a fire, the energy-saving logic must be bypassed to either shut down the unit or ramp it to 100% for smoke spill purposes.
Digital Twin Logging:
EECA 2024 requires that your energy data be logged.
The Malaysian government provides significant tax relief for companies that invest in energy-efficient AHUs before the end of 2026.
| Incentive | Benefit | Requirement |
| GITA (Tier 1) | 100% Tax Allowance | Claim against 70% of statutory income for green assets purchased by Dec 31, 2026. |
| GITA Asset Merger | Streamlined Application | For 2026, GITA Asset and Project tracks are merged to reduce paperwork for businesses. |
| TNB MD Savings | Reduced Peak Demand | VFDs reduce "in-rush current," lowering the Maximum Demand (MD) charges on your monthly TNB bill. |
Before spending on new hardware, ensure the "passive" elements of the AHU are optimized:
Pressure Drop Management: Change filters when they hit their pressure threshold (typically 200–250 Pa) to stop the fan from working harder than necessary.
Coil Cleaning: Biofilm on cooling coils acts as an insulator, forcing the chiller to work harder. Annual chemical cleaning can improve heat transfer efficiency by 10–15%.
Leakage Audits: Inspect ductwork for air leaks; a 10% leak in the supply duct requires the fan to run significantly faster to maintain zone pressure.
Are you looking to retrofit an existing AHU or specify a new high-efficiency system for a development project?
Lebih maklumat tentang EKG M & E SDN BHD
Malaysia
