Description

SETEC Wall Box Type 2 • Dual Output AC Charging Station

SETEC Dual 22kW AC EV Charger

2 × 22kW Type 2 socket charger for commercial car parks, retail, hotels and fleet depots.

SETEC 2 × 22kW Wall Box is a dual-output AC Mode 3 EV charging station with two Type 2 sockets. Each socket provides up to 22kW AC output, enabling practical fast AC charging for two EV parking bays.

The unit includes a 7" LCD display for easy user interface, built-in Ethernet and 4G modem, and supports OCPP for intelligent charging management and billing applications.

It is suitable for commercial car parks, retail and business parks, hotels, fleet depots, condominiums, offices and other shared charging locations.

2 × 22kW 44kW Total AC Mode 3 Type 2 Socket × 2 7" LCD Display Ethernet + 4G OCPP / Modbus TCP RFID Card / OCPP Start IP54

Request Quotation Installation Enquiry

Package Summary

This package is designed for locations that need two AC charging outlets with supply, installation, commissioning and user training.

22kW × 2

Dual Three Phase AC Charging

Two Type 2 socket outlets, each supporting up to 22kW AC charging where the site supply and vehicle onboard charger allow.

Supply, installation, commissioning and training
Installation available nationwide Malaysia
OCPP / Modbus TCP communication support
RFID card or OCPP start method

44kW

Total Charging Capacity

One dual-output wallbox can support two EV charging bays with a total AC charging output of up to 44kW.

RM8,888

Indicative package price based on the provided webpage content. Final price depends on site condition, cable route, installation scope and project requirements.

Why Choose SETEC 2 × 22kW Wall Box?

For commercial and shared parking locations, a single-output charger may not be enough. The SETEC dual-output wallbox allows two EV users to charge from one charging station, making it more practical for two-bay installations.

With Ethernet, 4G, OCPP, Modbus TCP, RFID and a 7" LCD display, it is suitable for managed charging environments where user access, monitoring and billing options may be required.

A dual-output AC charging station for sites that need two Type 2 charging points, intelligent access control and connected charger management.

Actual charging speed depends on site supply, protection design, charger configuration and each vehicle’s onboard AC charging limit.

Designed for Commercial and Shared Charging

Dual Output AC Mode 3 Charger

SETEC 2 × 22kW Wall Box is a dual-output AC Mode 3 charger with two Type 2 sockets.

22kW per Socket

Each socket provides up to 22kW AC output, enabling fast AC charging for compatible EVs.

7" LCD Display

The integrated 7" LCD display provides a clear and easy user interface.

Ethernet and 4G Built In

Each unit is equipped with built-in Ethernet and 4G modem for connected charging applications.

RFID Card or OCPP

Supports user access and charging start through RFID card or OCPP-based control.

Billing and Management Ready

Supports different billing and charging management requirements through OCPP integration.

Features Overview

The feature visual below highlights the charger’s dual 22kW capability, Type 2 socket arrangement, LCD interface and connected charger design.

SETEC Dual 22kW AC EV Charger Feature Overview

Safety and Operating Features

Over-Current Protection

Helps protect the charger and connected circuit against excessive current conditions.

Short Circuit Protection

Supports safer operation by protecting against short circuit fault conditions.

Leakage Protection

Includes leakage protection with leakage current specification of less than 30mA.

EST

Emergency Stop

Emergency stop function is included for quick interruption during abnormal or unsafe conditions.

Integrated Overload Protection

Integrated overload protection supports safer charger operation during high load conditions.

LED

LED Status Indicator

Colour LED indicators show operating status and improve local operation visibility.

Installation Package

The installation package includes charger installation, electrical protection, isolator and cabling based on the provided package scope. Final scope must be confirmed after site assessment.

2 × 22kW Three Phase Installation Package

EV junction box enclosure
3 phase 4 pole MCB 63A branded
3 phase 4 pole RCCB 63A branded
3 phase 4 pole isolator switch 60A branded
Up to 15m of 16mm² x 5C PVC cable with PVC conduit
Supply, installation, commissioning and training

Supply, Installation, Testing and Commissioning

Dual-output EV charger installation requires proper electrical design because the charger can draw a high continuous three phase load when both outlets are in use.

Site Assessment

Review incoming supply, available capacity, DB location, cable route, parking layout and charger mounting position.

Electrical Installation

Install charger, protection devices, isolator, junction box, cabling, conduit and accessories based on confirmed site scope.

Commissioning and Training

Commission the charger, verify operation, test protection where applicable and provide user / operator guidance.

For two-outlet 44kW charging, proper cable sizing, protection selection, earthing verification, trip testing and commissioning are important before handover.

Suitable Applications

Commercial Car Parks

Suitable for managed parking areas where two EV charging bays are required.

Retail and Business Parks

Useful for visitor, tenant, customer or staff EV charging applications.

Hotels and Hospitality

Provide EV charging facilities for guests, visitors and internal vehicles.

Fleet Depots

Suitable for workplace or depot charging where two vehicles may need AC charging access.

Condominiums and Apartments

Suitable for shared or dedicated EV charging bays, subject to management approval and electrical capacity.

Offices and Factories

Support staff, management, visitor or company EV charging requirements.

General Specification

Item	Specification
Product Type	Wall Box Type 2 AC Charging Station
Charging Type	AC Mode 3 charger
Input Voltage	400V AC, 3 Phase
AC Charging Output	2 × 22kW
Outlet Socket	2 × Type 2 socket
Mounting	Wall or pedestal / pole mounted
Status Indicator	LED status indicator and 7" LCD display
Compatible Standards	IEC 61851, IEC 62196
IP Class	IP54, indoor and outdoor rated
Environment Humidity	≤90% at 40 ±2°C
Ambient Temperature	-25°C to +55°C
Storage / RFID Operating Temperature	-20°C to +85°C

Electrical Specification

Item	Specification
AC Phase	3 Phase
Phase Voltage	400 ±10%V AC
Frequency	50Hz / 60Hz
Phase Current	Max 64A
Working Current	63A
Dielectric Strength	>10MΩ at 500V
Leakage Current	<30mA
Communication Method	Ethernet and 4G
Protocol	OCPP / Modbus TCP
Start Method	RFID card / OCPP

Socket and RFID Card Reader

Item	Specification
Socket Standard	IEC 62196-2 Sheet 2-IIa
No-Load Insertion and Removal Times	5000
Socket Working Current	63A
Flammability Rating	UL94V-0
Insulation Resistance	1000MΩ at 500V
Pressure Resistance	2000V
RFID Frequency	13.56MHz
Card Reading Method	Contactless
Card Type	Mifare 1 S50
RFID Standard	ISO14443A, ISO14443B
Coupled Force	45N < 80N

Product Summary

SETEC 2 × 22kW Wall Box Type 2 AC Charging Station is a dual-output AC Mode 3 charger with two Type 2 sockets, 22kW output per socket, 7" LCD display, Ethernet and 4G communication, OCPP / Modbus TCP and RFID card / OCPP start control.

With IP54 indoor / outdoor rating, over-current protection, short circuit protection, leakage protection, emergency stop, integrated overload protection and connected charging management capability, it is suitable for commercial car parks, retail and business parks, hotels, fleet depots, offices and shared EV charging locations.

SETEC Dual 22kW — Two Charging Bays. One Connected AC Charging Station.