TB11LV01: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	1.6	-	5.5	V
Input Voltage	VIN	Operating	-0.3	-	VDD+0.3	V
Output Voltage	VOUT	High level (VDD = 5V)	-	4.2	5.0	V
		Low level (VDD = 5V)	0	0.8	-	V
Leakage Current	ILK	VIN = VDD, VOUT = 0V	-	1	-	μA
Propagation Delay	tPD	VIN to VOUT, VDD = 5V	-	6	-	ns

Power Supply:
- Ensure the supply voltage (VDD) is within the operating range of 1.6V to 5.5V.
Input Signal:
- The input voltage (VIN) should not exceed VDD + 0.3V or go below -0.3V to prevent damage to the device.
Output Operation:
- When VDD is set to 5V, the output voltage (VOUT) will be approximately 4.2V to 5.0V at high level and 0V to 0.8V at low level.
Leakage Consideration:
- Be aware of the leakage current (ILK) which can be up to 1μA when VIN equals VDD and VOUT is grounded.
Timing:
- The typical propagation delay (tPD) from VIN to VOUT is around 6ns under a 5V supply voltage.
Handling Precautions:
- Handle the component with care to avoid electrostatic discharge (ESD) damage.
- Ensure proper heat dissipation if used in high-frequency applications.
Mounting:
- Follow standard surface-mount technology (SMT) procedures for mounting this component on a PCB.
Storage:
- Store in a dry, cool place away from direct sunlight and moisture.

(For reference only)