|
Product Summary |
|
|
The New Standard for Synthesis Experiments |
|
|
|
|
Features |
|
|
Stainless steel with good heat retention |
|
Safe and reliable bath operation with reduced failure risks |
|
Anti-slip Structure for Stirrer Operation |
|
Minimizes oil waste through recommended oil volume guidelines |
|
Safety design incorporating independent overheat preventers and heater guards |
|
Accurately adjust the reaction temperature to the desired level |
|
|
|
|
|
|
|
Specifications |
|
|
Specification Item |
Details |
|
Model |
BOS100 |
|
Bath |
Stainless steel plate |
|
Exterior |
Stainless steel sheet / Chrome-free electro-galvanized steel sheet, Baked finish |
|
Heater capacity |
310W, at 100V |
|
Temperature setting range |
0 ~260°C |
|
Temperature control range |
Room temp. +5 ~250°C |
|
Temperature control Accuracy |
±0.3°C (at 200°C, when stirring) |
|
Temperature control method |
P.I.D. control, Temperature difference control |
|
Temp. setting and display method |
Digital setting / display with UP/DOWN key (Indication 1°C Unit) |
|
Operating functions |
Fix temp. operation |
|
Additional functions |
Calibration offset function, Power failure compensation selection function, LED brightness switching function |
|
Heater circuit control |
Triac, Zero cross method |
|
Sensor |
Pt100 sensor (Class A) |
|
Safety Devices |
Self-diagnosis function (temperature sensor error detection, automatic overheating prevention function, communication error, abnormality out of set temp. range), Fuse (6.3A short-circuit, overcurrent protection), Independent overheating prevention device |
|
External dimensions (diameter×depth×height) |
φ155×210×140mm (including heater unit) |
|
Bath inner dimensions (inner diameter×height) |
φ140×100mm |
|
Bath capacity No load (recommended) |
Approx. 0.8L |
|
Bath capacityNo-load (maximum) |
Approx. 1.0L |
|
Controller unit (W×D×H) |
150×90×45mm (protrusions not included) |
|
Power Source |
Single phase AC100V (50/60 Hz) 4.0A |
|
Bath and heater unit Weight |
Approx. 2.5kg (including cable) |
|
Controller unit Weight |
Approx.0.5kg |
|
Total weight |
Approx. 3.0kg |
|
Accessories |
Heater guard (1 set), Arbor (outer diameter φ12×90 mm: 1 piece), Stirring bar (approx. φ8×50 mm: 1 piece) Connector cap (1 pc), Identification sticker (1 pc), Zip tie with tag (3 pcs) |
Malaysia
