Digital display thousand-point table
Main features
1. Zeroing at any position (ZERO/ABS);
2. English conversion (mm/in);
3. When measuring, press the M key to enter the HOLD state, and the screen will keep the measured value at this time;
4. Record the maximum value (MAX) in the continuous measurement process;
5. Record the minimum value (MIN) in the process of continuous measurement;
6. Record the difference between the maximum value (MAX) and the minimum value (MIN) (△=MAX-MIN) in the continuous measurement process, which is used for the measurement of flatness and coaxiality;
7. During the measurement process, it is automatically determined whether the workpiece is qualified (TOL) according to the set upper and lower limit dimensions, without relying on the memory of the operator;
8. Measure incrementally (ABS), and measure the workpiece in segments. After the measurement, multiple segments will be
Accumulation of data;
9. Measure by absolute origin (PRE). Preset a basic dimension before measuring, and read when measuring
The resulting data is the actual size of the workpiece, that is, the actual size = preset basic size + deviation;
10. The measured data can be transmitted (DATA) through the data acquisition system.
11. The USB data cable plug and battery cover are tightened with screws to ensure that the connection is more reliable;
12. The sensor adopts a glass grid, which has stronger weather resistance, higher accuracy and better stability;
13. The data processing speed is faster, it is not easy to count randomly, and the adaptability is better.
Malaysia
