Ready Stock!
WEBER WEBERMIX STARBOND ADMIX SUSU FOR GENERAL PURPOSE LATEX ADMIXTURE (4 LITRE)
Webermix starbond is a multi purpose latex emulsion polymer additive to be use with cement, cement/sand, premixed mortar or tile adhesive and grout to impart flexibility, water resistence and greatly improve workability. It is suitable for interior or exterior installation works.
USES
Webermix starbond is used with cement-based tile adhesive, in replacemebnt of gauging water for external wall & floor tilling, tilling to dense/ smooth concrete, tilling to building boards like plywood, chipboard, cement fiber board, tilling to heavy pedestrian traffic area.
MIXING RATIO
Approx. 6-8 litres webermix starbond to 25kg bag of cement-based tile adhesive
Shelf Time : 12 months if unopened
Colour : Milky White Liquid
Specific Gravity : 1.00
Viscosity : 200-300 mPa
pH : 9-10
Shelf time : 12 months
Inflammbility : No
Toxicity Hazard : No
Mix proportion : 1 part amixture to 2.5-3.0 part cement-based adhesive
Application Temparature : Above 5°C and at ambient temperature
Working time (Pot life) : Depend on the type of adhesive, it will slightly extend
Open time : Depend on the type of adhesive, it will slightly extend
Temperature resistance : 100°C
Water resistance (cued): Good
Chemical resistant : Acid – poor ; alkalis – good ; Solvent – Average
Flexibility : Good
