HUPLONG INDUSTRIES (M) SDN BHD is the authorized distributor of NORRES industrial hoses in Malaysia.
HUPLONG INDUSTRIES (M) SDN BHD supplies genuine NORRES PRO₂AIR® Pre-PUR 621 membrane diffuser tubes for industrial and municipal wastewater treatment applications. NORRES officially lists this membrane diffuser tube for pressure diffusion with fine bubbles, oxygen input for nitrification in activation basins, and permanent or intermittent ventilation.
NORRES PRO₂AIR® Pre-PUR 621 is a membrane diffuser tube with a wall made from special premium polyurethane Pre-PUR®. The official membrane wall thickness is approximately 0.6 mm.
NORRES specifies high energy savings compared with market-standard EPDM and silicone diffusers due to lower pressure loss. The membrane does not contain a plasticizer, and NORRES states that this helps provide a long service life without curing. The optimized perforation is designed to provide very fine and uniform bubble formation.
NORRES lists a normal operating range of 3 to 8 Nm³/(h*m aer.), with a minimum operating value of 1 Nm³/(h*m aer.), a maximum operating value of 15 Nm³/(h*m aer.) and a purging operation value of 18 Nm³/(h*m aer.).
Official NORRES applications include oxygen input and circulation in fixed-bed and bioreactors, thorough mixing of activation basins, sand trap louvre ventilation, lake and river renaturation, aquaculture and fish farming.
NORRES specifies very good resistance to wastewater and municipal sewerage in accordance with DWA-M 115. The membrane diffuser tube is also specified as microbe resistant and hydrolysis resistant, with good resistance to oil, gasoline and chemicals.
The official operating temperature range is from -40°C to +90°C. Current standard variants are Size 63 mm with an inside diameter of 64.5 mm. Available current lengths are 570 mm, 820 mm and 1070 mm, with ventilation lengths of 500 mm, 750 mm and 1000 mm respectively.
Our team can assist customers throughout Malaysia with NORRES hose selection based on hose diameter, conveyed material, operating temperature, airflow, vacuum condition, installation length and quantity requirement. For PRO₂AIR® Pre-PUR 621, selection should also consider required air flow, basin geometry, diffuser placement, blower capacity, wastewater condition, installation method and total diffuser quantity.
FAQ
Q: What is NORRES PRO₂AIR® Pre-PUR 621?
A: NORRES PRO₂AIR® Pre-PUR 621 is a membrane diffuser tube for industrial and municipal wastewater treatment applications.
Q: What is the official membrane material?
A: NORRES specifies a special premium polyurethane Pre-PUR® membrane wall with an approximate thickness of 0.6 mm.
Q: What applications are officially listed by NORRES?
A: NORRES lists pressure diffusion with fine bubbles, oxygen input for nitrification in activation basins, permanent or intermittent ventilation, fixed-bed and bioreactors, activation basin mixing, sand trap louvre ventilation, lake and river renaturation, aquaculture and fish farming.
Q: What is the official air flow operating range?
A: NORRES specifies normal operation at 3 to 8 Nm³/(h*m aer.), with a minimum of 1 Nm³/(h*m aer.), a maximum of 15 Nm³/(h*m aer.) and purging operation at 18 Nm³/(h*m aer.).
Q: What is the operating temperature range?
A: NORRES specifies an operating temperature range from -40°C to +90°C.
Q: Does PRO₂AIR® Pre-PUR 621 help reduce pressure loss?
A: NORRES states that the diffuser can provide high energy savings compared with market-standard EPDM and silicone diffusers because of lower pressure loss.
Q: Is the membrane resistant to wastewater?
A: NORRES specifies very good resistance to wastewater and municipal sewerage in accordance with DWA-M 115. The membrane is also specified as microbe resistant and hydrolysis resistant.
Q: Which standard lengths are currently available?
A: NORRES currently lists 570 mm, 820 mm and 1070 mm versions. Their ventilation lengths are 500 mm, 750 mm and 1000 mm respectively.
Q: How should the correct PRO₂AIR® Pre-PUR 621 diffuser be selected?
A: Selection should consider required air flow, diffuser length, ventilation length, basin layout, blower capacity, wastewater condition, installation method, diffuser quantity and operating duty.
Malaysia
