Ready Stock!
Dulux Inspire Smart Choice Interior is an affordable good quality water based paint. It provides good coverage and good opacity that delivers a smooth finish for the walls in your home.
Usage: Dulux Inspire Smart Choice Interior is suitable for all normal interior wall surfaces.
– Finish : Matt
– Coverage : 10-12 m2/L.
– Drying Time : Single coat at standard thickness: Touch Dry: Dependent on temperature and humidity. Recoat: 2-3 hours.
– Coats : 2
Product Features:
– Good coverage & good opacity
– Low odour
– Low VOC
– No added Lead and Mercury
1. Preparing the Surfaces
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260). If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Dulux Sealer/Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 16%. These walls should be left to dry further
2. After use
Clean all equipment with water immediately after use.
3. Storing
Keep away from food, drinks and animal feed. Store in a cool and shaded place.
Malaysia