In the 2026 Malaysian regulatory landscape, "Fire Proof HVAC" refers to BOMBA Certified systems that satisfy the life-safety mandates of the Fire Services Act 1988 (Act 341) and the Uniform Building By-Laws (UBBL) 2026. As of February 3, 2026, new regulations under the Fire Services Regulations 2026 specify that all mechanical ventilation and air conditioning equipment must meet rigorous fire-safety standards to obtain or renew a Fire Certificate (FC).
At EKG (Malaysia) SDN BHD, we engineer Fire Proof HVAC systems to ensure they are Sterile, Silent, and Statutory-Compliant.
A "Fire Proof" setup is legally defined by its AHU Safety Permit. This permit is a mandatory prerequisite for the building's Certificate of Completion and Compliance (CCC) and annual FC renewal.
Interlock with FAMS: Every AHU serving a compartment larger than 92.9 square meters (1,000 sq. ft.) must be hard-wired to the Fire Alarm Monitoring System (FAMS).
Automatic Fire Signal AHU Shut-off: Upon smoke detection, the system triggers an immediate power-cut to the IE5 EC Fan Walls. This prevents the HVAC from acting as a "smoke pump" that recirculates toxic fumes throughout the building.
eFEIS 2.0 Integration: All fire-safety hardware must be registered in the eFEIS 2.0 digital system, ensuring every component has a verifiable BOMBA "K" Mark.
A Fire Proof HVAC installation is a combination of active detection and passive containment.
| Component | 2026 Requirement | Engineering Purpose |
| Motorized Fire Dampers | MS 558:2024 Certified | Automatically seals duct penetrations in fire walls in < 20 seconds. |
| Duct Smoke Detectors | Photoelectric / UL-Listed | Triggers localized shutdown before smoke enters the air stream. |
| Casing Insulation | Class 0 (Non-Combustible) | Prevents the AHU from contributing to the plant room fire load. |
| FR Cabling (Class C) | MS 2116 Compliant | Ensures the shut-off signal survives high-heat events. |
To be "Fire Proof," the installation must be housed in a BOMBA Approved Layout that functions as a localized fire cell.
2-Hour Fire Rating: The plant room must be enclosed by walls and slabs with a minimum 2-hour fire-resistance rating.
Passive Fire-Stopping: All penetrations for pipes and ducts must be sealed with BOMBA-approved intumescent fire-stop mortar or mastic.
Access Clearance: A minimum 1000mm frontal clearance is required for fire officers to reach the Fireman’s Switch during an emergency.
Under the 2026 standards, "Fire Proof" status is verified through physical witness testing:
Functional Smoke Test: Non-toxic smoke is injected into the return air plenum to verify the millisecond-response of the automatic shut-off protocol.
Damper Integrity Audit: We provide a comprehensive Damper Performance Report, which is now required by BOMBA for the annual FC inspection.
Digital Twin (LOD 500): All fire-safety coordinates are uploaded to your building’s Digital Birth Certificate, ensuring the system remains auditable for the 5-year periodic energy and safety audit.
Technical Integrity: Our fire-proofing is designed by mechanical engineers who understand the complex intersection of thermodynamics and fire-life safety.
EECA 2024 Alignment: We utilize high-efficiency dampers that meet fire ratings without adding unnecessary pressure drop, protecting your unit's Specific Fan Power (SFP).
GITA Support: Documented compliance with 2026 BOMBA standards is essential for claiming the 100% Green Investment Tax Allowance.
Is your HVAC system fire-proof enough for a 2026 statutory audit? Contact EKG (Malaysia) SDN BHD today for a specialized Fire Proof HVAC & Safety Permit Assessment.
Are you applying for a safety permit for a new high-rise project or conducting a fire-safety upgrade for an existing facility?
Malaysia
