In the 2026 Malaysian regulatory landscape, the AHU Operational Test (also known as the Stand-Alone Test or SAT) is the final verification that the unit is ready for full-scale integration. Under the Energy Efficiency and Conservation Act (EECA) 2024, this test is no longer a simple "start-stop" check; it is a statutory performance benchmark. A successful operational test proves that the AHU can achieve its design setpoints while adhering to the mandatory Building Energy Intensity (BEI) and Specific Fan Power (SFP) targets.
At EKG (Malaysia) SDN BHD, our operational testing protocols are Statutory-Compliant and Data-Driven, ensuring that your VFD-driven AHU is optimized for Malaysia's tropical climate from the very first hour of operation.
Operational testing is the primary evidence required for building handover and statutory energy logging.
SFP Verification: We measure the fan’s kW draw during the test to ensure it does not exceed the 1.6 kW/m³/s limit mandated by MS 1525:2024.
VFD Modulation Audit: We verify that the VFD Integrated Static Pressure Transducer correctly adjusts the fan speed. Failure to modulate is a direct violation of the 2026 energy efficiency mandates.
GITA Compliance: Documented operational test results are a technical prerequisite for claiming the 100% Green Investment Tax Allowance (GITA).
An EKG operational test follows a rigorous three-stage sequence to ensure mechanical and electrical integrity.
| Test Stage | Engineering Action | Purpose |
| Phase 1: Pre-Start Check | Verify wiring, rotation, and filter seating. | Prevents mechanical damage to the IE5 EC Fan Wall or motor. |
| Phase 2: Start-Up & Amp Audit | Measurement of Starting vs. Running Amps. | Ensures electrical loads are balanced and within nameplate specifications. |
| Phase 3: Stabilization Run | 30–60 minute continuous run. | Allows air properties to stabilize for accurate psychrometric recording. |
The most critical part of the 2026 operational test is the 30-Minute Stabilization Run. This ensures the unit can maintain indoor conditions as required by DOSH (JKKP) 2026.
On/Off-Coil Psychrometrics: We record the Dry Bulb (DB), Wet Bulb (WB), and Relative Humidity (RH) across the coil.
Acoustic Signature Test: We verify that the unit operates within the NC 30-35 acoustic range. Excessive vibration or "rumble" during the operational test often indicates poor AHU Ducting Service or unoptimized VFD frequencies.
Filter Delta-P Measurement: We record the pressure drop across the MERV 13+ filters. This provides the "Clean Resistance" baseline for your building’s maintenance log.
The Operational Test includes a mandatory "Life Safety" fail-safe check to satisfy BOMBA (JBPM) 2026 regulations.
Emergency Push Stop: We verify the functionality of the local emergency stop button and main disconnection switch.
Limit Switch Cut-Off: We test the fan section limit switches.
Automatic Fire Signal AHU Shut-off: We trigger a simulated fire signal from the Fire Alarm Monitoring System (FAMS) to witness the AHU's automatic shutdown and damper response.
Technical Integrity: We are specialized T&C contractors, not just fabricators. We provide NATA-traceable, calibrated instruments for all measurements.
Audit-Ready Reporting: We provide a comprehensive AHU SAT Report that includes VFD duty points, psychrometric maps, and vibration analysis.
REM Support: Our documentation is formatted to assist your Registered Energy Manager (REM) in fulfilling mandatory statutory energy submissions.
Is your new AHU ready for its statutory performance audit?
Contact EKG (Malaysia) SDN BHD today for a professional AHU Operational Test to ensure Day-1 compliance with 2026 energy and safety laws.
更多 EKG M & E SDN BHD 相关资料
Malaysia
