DATATEST WTHPVSYS Thermal Distribution Verification System: 马来西亚的首选 MTM Precision Sdn Bhd

详情

Brief introduction:

The WTHPVSYS thermal distribution verification system mainly consists of three parts: A) Wireless verification probes: wireless temperature probes, wireless humidity probes, and wireless pressure probes, which collect and record parameters for each environment. B) Data readers: single-hole readers and eight-hole readers, mainly acting as a bridge between the probes and the software, and providing functions for setting and reading relevant parameters. C) Thermal distribution verification system software: used to set relevant probe parameters, read data, analyze data, and export verification reports.

Details:

I. Introduction to the Thermal Distribution Verification System:
The WTHPVSYS thermal distribution verification system mainly consists of three parts:
A) Wireless verification probes: wireless temperature probes, wireless humidity probes, and wireless pressure probes, which collect and record parameters for each environment.
B) Data readers: single-hole readers and eight-hole readers, mainly acting as a bridge between the probes and the software, and providing functions for setting and reading relevant parameters.
C) Thermal distribution verification system software: used to set relevant probe parameters, read data, analyze data, and export verification reports.
II. Application of the thermal distribution verification system:
The WTHPVSYS thermal distribution verification system is primarily used for environmental verification of equipment such as pressure vessels, ovens, refrigerators, incubators, storage boxes, tunnel ovens, etc. During verification, no wiring is required; simply place the wireless temperature verification probe (temperature range: -90 to 150°C) directly into the environment being tested. The probe will record the verification data completely and accurately, ensuring data integrity even if the battery is depleted. The accompanying verification software complies with FDA 21 CFR Part 11 requirements, is tamper-proof, and allows for traceability and auditing.
III. Characteristics of the Thermal Distribution Verification System:
A. The wireless verification probe is constructed of 316L stainless steel and PEEK materials, making it completely waterproof, corrosion-resistant, high-temperature resistant, and high-pressure resistant.
B. It adopts a high-precision PT100 temperature sensor and high-precision humidity and pressure sensors, with accuracies of ±0.1℃/±1.5%RH/±0.25% full scale, respectively, to meet the verification and testing needs of various fields, and the measurement range of each parameter is wide.
C. Wireless, compact design, only 26mm in diameter, requires no wiring, and adaptable to various environments and devices.
D. It features both single-hole and eight-hole readers, USB connectivity for communication, and convenient and fast reading of settings.
E. The wireless verification probe has a memory capacity of over 32,000.
F. Multiple probe options are available: hard probes, soft probes, or probe-free.
G. Users can replace the battery themselves, which can extend the battery life by 2-3 years, depending on the specific situation.
H. The software supports multiple systems, automatically compiles relevant data, automatically calculates F-values, and automatically exports various validation reports. It complies with FDA 21 CFR Part 11 and GMP requirements, has a tracking audit function, and possesses CE certification and software copyright certificate.
IV. Parameter table of wireless temperature verification probe:

name	short probe	Long probe	soft probe
model	DT-300PRO	DT-300C	DT-300R
Temperature measurement range	-90℃~150℃	-90℃~150℃	-90℃~150℃
resolution	0.01℃	0.01℃	0.01℃
Temperature accuracy	±0.1℃	±0.1℃	±0.1℃
Record capacity	≥32000	≥32000	≥32000
Sampling interval	1 second to 24 hours	1 second to 24 hours	1 second to 24 hours
Material	316L and PEEK	316L and PEEK	316L and PEEK
Main body size	#26mm×45mm	#26mm×45mm	#26mm×45mm
Thread size	#8mm×10mm	#8mm×10mm	#8mm×10mm
probe size	#4mm×40mm	#4mm×90mm	#2mm×490mm
weight	≈95g	≈98g	≈100g
Waterproof rating	IP68	IP68	IP68
Replaceable battery	3.6V lithium battery	3.6V lithium battery	3.6V lithium battery

V. Parameter Table of Wireless Temperature and Humidity Verification Probe

name	Wireless temperature and humidity probe
model	DT-330
Temperature measurement range	-40℃~100℃
Temperature range	-40℃~125℃ (It is not recommended to test humidity above 100 degrees Celsius)
resolution	0.01℃
Temperature accuracy	±0.1℃
Humidity range	0%~100%
resolution	0.01%RH
Humidity accuracy	±1.5%
Record capacity	Temperature: ≥16000 Humidity: ≥16000
Sampling interval	1 second to 24 hours
Material	316L and PEEK
Main body size	#26mm×75mm
wet chamber dimensions	#18mm×10mm
weight	≈95g
Waterproof rating	IP56
Replaceable battery	3.6V lithium battery
Battery life	2 years (typical application)

VI. Parameter Table of Wireless Pressure Verification Probe

name	Wireless pressure probe
model	DT-300Y
Pressure range	0-100 PSI absolute pressure (0-680 kPa) (Equivalent relative pressure: -100kPa~580kPa)
resolution	0.01 kPa
Pressure accuracy	±0.25% of full scale
Record capacity	≥32000
Sampling interval	1 second to 24 hours
Material	316L and PEEK
Main body size	#26mm×67mm
Sensor compartment size	#8mm×10mm
weight	≈130g
Waterproof rating	IP68
Replaceable battery	3.6V lithium battery
Battery life	2 years (typical application)

VII. Verification Software (WTHPVSY V1.35)
It complies with FDA 21CFR Part 11 and the new GMP requirements.
It can automatically analyze and export F-value hotspots and colds, curve reports, location map reports, temperature analysis reports, audit traceability, and electronic signature functions. Once the data is generated, it cannot be altered.
Secure and reliable system management with three-level user access control.

更多 MTM Precision Sdn Bhd 相关资料