U Shape Drain: Top Choice in Penang, Malaysia, Simpang Ampat PINTAS TRADING SDN BHD

U Shape Drain

Available

296 variants are available

Dry Weather Flow

With Dry Weather FlowWithout Dry Weather Flow

Starter Bar

Without Starter BarWith Starter Bar

Nominal Size [Base (mm) x Height (mm) x Length (Meter)]

3600 x 1800 x 1.0m3600 x 2100 x 1.0m3600 x 2400 x 1.0m3600 x 2700 x 1.0m3600 x 3000 x 1.0m300 x 300 x 1.2m300 x 450 x 1.2m300 x 600 x 1.2m375 x 375 x 1.2m375 x 450 x 1.2m375 x 600 x 1.2m450 x 450 x 1.2m450 x 600 x 1.2m600 x 300 x 1.0m600 x 300 x 1.2m600 x 450 x 1.0m600 x 450 x 1.2m600 x 600 x 1.0m600 x 600 x 1.2m750 x 450 x 1.0m750 x 600 x 1.0m750 x 750 x 1.0m900 x 450 x 1.0m900 x 600 x 1.0m900 x 750 x 1.0m900 x 900 x 1.0m1200 x 300 x 1.0m1200 x 450 x 1.0m1200 x 600 x 1.0m1200 x 750 x 1.0m1200 x 900 x 1.0m1200 x 1050 x 1.0m1200 x 1200 x 1.0m1500 x 600 x 1.0m1500 x 750 x 1.0m1500 x 900 x 1.0m1500 x 1050 x 1.0m1500 x 1200 x 1.0m1500 x 1350 x 1.0m1500 x 1500 x 1.0m1800 x 600 x 1.0m1800 x 900 x 1.0m1800 x 1050 x 1.0m1800 x 1200 x 1.0m1800 x 1350 x 1.0m1800 x 1500 x 1.0m1800 x 1650 x 1.0m1800 x 1800 x 1.0m2100 x 1200 x 1.0m2100 x 1500 x 1.0m2100 x 1800 x 1.0m2100 x 2100 x 1.0m2400 x 1200 x 1.0m2400 x 1500 x 1.0m2400 x 1800 x 1.0m2400 x 2100 x 1.0m2400 x 2400 x 1.0m2700 x 1500 x 1.0m2700 x 1800 x 1.0m2700 x 2100 x 1.0m2700 x 2400 x 1.0m2700 x 2700 x 1.0m3000 x 1500 x 1.0m3000 x 1800 x 1.0m3000 x 2100 x 1.0m3000 x 2400 x 1.0m3000 x 2700 x 1.0m3000 x 3000 x 1.0m3300 x 1500 x 1.0m3300 x 1800 x 1.0m3300 x 2100 x 1.0m3300 x 2400 x 1.0m3300 x 2700 x 1.0m3300 x 3000 x 1.0m

Description

Design Consideration

Specification	Standard Size	Super Size
Concrete Characteristic Strength	30 MPa	40 MPa
Concrete Cover	25mm	30mm
Structural Design	BS 8110 : 1997	BS 8110 : 1997
U-Drain Length	1 metre (Standard)	1 metre (Standard)

Loading Condition

Types

Standard Size U-Drain:

Super Size U-Drain:

Handling:

A spreader beam to be used with steel pins and lifting cables to avoid cracking at junction of side wall and base slab.

Stacking:

U-drains are to be stacked on level and stable ground to avoid cracking of base slab.

Laying:

For most installations, U-drains may be laid on sand bedding. However, in bad ground, it may be necessary to excavate deeper and place a layer of hard core before placing the sand bedding.

Jointing:

Butt joints. Where necessary, cement mortar is normally used to fill the gap between U-drain units.

Backfilling:

Backfilling with selected free draining backfill material. Avoid use of heavy vibratory equipment next to side walls.

*As sizes can differ between brands, if the size you need isn't available in the variants, please WhatsApp us with your specific size request.

More detail about PINTAS TRADING SDN BHD