Description
IDROSTOP PVC PVC Waterstop PVC ֹˮ
DESCRIPTION
PVC waterstop for sealing structural joints.
USES
For waterproong structural joints in civil, industrial and hydraulic constructions.
Some application examples:
Waterstops are used to make water-tight structural joints in underground reinforced concrete constructions to avoid ingress from the water table and in reinforced concrete structures used to contain water, such as swimming pools, water tanks and dams.
Idrostop PVC CJ & EJ ranges - embedded in the concrete
This type of joint is positioned at half thickness of the foundations or wall and must be stretched and held in position with wire. One end of the wire is attached to the reinforcement rods while the other end is attached to the waterstop. Insert a suitable type of compressible material between the first and second cast of concrete to form the joint (for EJ types) to prevent this from being clogged by any rigid material.
Idrostop PVC RGC & RGE - external joint
This type of joint is fastened in place by nailing it directly to the formwork or the layer of lean concrete. The fixing lugs must face towards the next layer of cast concrete so that it forms a perfect bond. As with embedded joints, insert a suitable type of compressible material between the first and second cast of concrete to form the joint (for RGE types) to prevent this from being clogged by any rigid material.
ADVANTAGES
% Forming product with good resistance to mechanical stresses
% Highly resistant to damage caused by sunlight, ozone and other aggressive agents present in the atmosphere and water table
PACKAGING
% Idrostop PVC is supplied in 20 metre rolls for 15 cm and 20 cm width and 15 metre rolls for 25 cm width, wrapped in polyethylene.
More detail about Power Strength Specialist (PG) Sdn Bhd
