Micro-volume Single-liquid Screw Valve Series (TON-MATE MSO8): Top Choice in Johor Bahru (JB), Malaysia SEM Equipment Sdn. Bhd.

Description

Model :

TON-MATE MSO8

Features:

1. Volumetric fluid transport, the flow rate is not affected by pressure changes.
2. Closed-loop motor drive, high output accuracy.
3. The stator has excellent corrosion resistance and particle resistance.
4. The rotor is made of high-hardness material, which makes it more wear-resistant.
5. Suitable for colloids with viscosity ranging from low to high.
6. No dripping or stringing issues with glue dispensing.
7. Control supports RS232 communication and real-time monitoring of dispensing status.
8. Supports time mode, automatic mode, volume mode, automatic dispensing, and automatic back suction.

Application:

It is suitable for various types of single-component fluids, including UV glue, red glue, sealing silicone, lubricating grease, conductive glue, epoxy glue, and thermal grease.

Technical parameters :

Input pressure	0~6 bar
Maximum output pressure	20 bar
Self-sealing ability	2 bar
Output accuracy	±1%
flow	Max. 0.72 ml/min
Dispensing consistency	>99%
Minimum dispensing amount	0.001ml
Rotor material	SUS304/SUS316L/Zirconium Oxide Ceramics
Stator material	FFKM/PU/EPDM/NBR
Wetted part material	SUS304/POM/PTFE/PEEK/AL
Feed port	Ф6mm tubing, Luer fitting, G1/8 thread
Discharge port	Luer connector
ambient temperature	10~40°C
Fluid viscosity	From water to paste, suitable for use with granular fillers.

More detail about SEM Equipment Sdn. Bhd.