UVGI (Ultraviolet Germicidal Irradiation) Retrofitting

UVGI (Ultraviolet Germicidal Irradiation) Retrofitting

Category: Antimicrobial AHU Refurbishment Available
For more information, visit our official website at eakon.com.my

Description

Industrial AHU Casing & Panel Restoration: UVGI Retrofitting

In the 2026 Malaysian industrial sector, UVGI (Ultraviolet Germicidal Irradiation) Retrofitting is a high-level engineering intervention for active Air Handling Unit (AHU) restoration. Under the DOSH (JKKP) 2026 Hygiene Codes and MS 1525:2024, UVGI is utilized to transition a passive AHU into an "Active Pathogen Neutralizer."

UVGI technology uses short-wavelength ultraviolet (UV-C) light (specifically at 254 nm) to disrupt the DNA and RNA of microorganisms, rendering them unable to replicate or infect. At EKG (Malaysia) SDN BHD, we integrate UVGI systems as part of an Antimicrobial AHU Refurbishment to ensure a Pathogen-Free environment, particularly in high-density office or clinical zones.


1. The Statutory Mandate: DOSH 2026 & "Pure Air"

UVGI retrofitting is a primary technical strategy for passing the most rigorous 2026 building health audits.


2. The 4-Stage AHU Decontamination Handshake

Before UVGI modules are retrofitted, the AHU Box must be biologically stabilized. UVGI is a maintenance and air-cleaning technology, but it cannot penetrate a "Rotting Core" caused by "The Sponge Effect."

Stage Engineering Action Purpose
I: HEPA Extraction Industrial H13 HEPA vacuuming. Removes the physical dust and fiber shards that would otherwise shield microbes from UV-C light.
II: Microbial Lysis pH-neutral enzymatic biocides. Chemically ruptures existing bio-films in the casing and coils.
III: Thermal Disinfection Vapor treatment at 120°C. Sanitizes panel joints to ensure the UVGI system isn't fighting a "leaking" biological source.
IV: ATP Validation Bioluminescence swab testing. Provides empirical proof of a 99.9% reduction in biological activity before UVGI startup.

3. Engineering for "Active Pathogen Neutralization"

The EKG approach integrates UVGI as a seamless component of the AHU's thermodynamic cycle.

  1. Downstream Coil Irradiation: We install UVGI lamps on the downstream side of the cooling coil. This targets the wettest area of the AHU, preventing mold and bacteria from colonizing the fins and the Condensate Drain Pan.

  2. Fiber-Free Reflectivity: UVGI works best in high-reflectivity environments. We replace legacy fiberglass with Fiber-Free Closed-Cell Insulation and apply a high-reflectance silver-ion coating to maximize UV-C "bounce" throughout the chamber.

  3. Laminar Flow smoothing: We seal all internal seams with Antimicrobial Mastic. This removes the shadows and "micro-pockets" where pathogens might hide from direct UV-C exposure.


4. The "Fire Mode" Statutory Protocol: BOMBA 2026

Every UVGI component and integration material must satisfy BOMBA (JBPM) 2026 life-safety codes.


5. Why Partner with EKG (Malaysia) SDN BHD?

Is your AHU a passive conduit or an active air-cleaning asset?

Contact EKG (Malaysia) SDN BHD today for a professional UVGI Retrofitting Audit & Restoration Plan.

More detail about EKG M & E SDN BHD
EKG M & E SDN BHD
EKG M & E SDN BHD ACMV Services Kuala Lumpur (KL), Fire Protection Services Selangor, Electrical Engineering Contractor Malaysia ~ EKG M & E SDN BHD
Contact Us flagMalaysia