In the specialized research and testing environments of Kuala Lumpur and Selangor, laboratories often handle a volatile cocktail of acids, solvents, and oxidizing agents. While standard PVC is common, Composite FRP (Fiberglass Reinforced Plastic) ducting is the "Heavy-Duty" standard for high-spec labs. It combines the extreme chemical resistance of premium resins with the structural rigidity of glass-fiber reinforcement, ensuring that exhaust systems remain airtight and structurally sound under high static pressures.
EKG M&E Sdn Bhd specializes in the design and installation of FRP laboratory exhaust systems, ensuring strict compliance with DOSH LEV (Local Exhaust Ventilation) standards and DOE emission requirements.
Laboratory FRP is a composite engineered to prioritize both chemical inertness and fire safety.
The Chemical Barrier (Internal): A resin-rich liner, typically made of Vinylester or Bisphenol, serves as the primary defense against corrosive vapors like Perchloric Acid or concentrated Nitric Acid.
The Structural Filament (External): A matrix of glass-fiber roving provides the mechanical strength. This allows for long horizontal duct runs with fewer support brackets, minimizing the structural load on laboratory ceilings.
Laboratories are high-risk fire zones. EKG utilizes Fire-Retardant (FR) Resins that include antimony trioxide or bromine additives.
BOMBA & UL 181 Compliance: Our FRP ducting is engineered to meet low-smoke and low-flame spread ratings, ensuring the exhaust path does not contribute to the spread of a fire within the facility.
As a specialized M&E contractor, EKG ensures your laboratory system supports both long-term uptime and EECA 2024 energy targets:
Zero-Leakage Integrity (ATC 6):
FRP joints are created using Hand-Layup Lamination (butt-and-strap joints). This chemically fuses the sections into a monolithic structure, ensuring a hermetically sealed path that prevents toxic fume leakage into the ceiling plenum.
TNB Energy Efficiency (Low Friction):
The internal resin liner is glass-smooth. By reducing static pressure throughout the system, your Variable Frequency Drives (VFDs) can maintain required face velocities at fume hoods while running at lower frequencies, directly reducing your monthly TNB electricity bill.
Perchloric Acid Safety:
For labs using perchloric acid, we engineer the FRP systems with integrated wash-down nozzles. The non-porous FRP surface allows for effective rinsing, preventing the buildup of explosive perchlorate salts—a feat impossible with traditional metal ducts.
| Feature | Standard PVC Ducting | EKG Composite FRP |
| Chemical Range | Good (Acids/Bases) | Superior (Includes Strong Solvents) |
| Structural Rigidty | Moderate (May sag over time) | High (Self-Supporting over longer spans) |
| Max Temperature | 60°C | 90°C to 110°C (Resin dependent) |
| Fire Safety | Self-extinguishing | Enhanced FR-Resin (Low Smoke) |
| Joint Type | Solvent Weld | Chemical Lamination (Monolithic) |
| Service Life | 15–20 Years | 30+ Years |
Total 3D BIM Coordination: We model laboratory exhaust paths in 3D to ensure perfect integration with Chemical Scrubbers, VAV (Variable Air Volume) controllers, and fume hood bypass systems.
Turnkey Validation: We provide full Testing & Commissioning (T&C) reports, including face velocity validation for fume hoods and static pressure profiling required for DOSH LEV certification.
Regional Expertise: Based in Kuala Lumpur, we provide site audits and professional fabrication for university research labs, pharmaceutical testing centers, and industrial quality control (QC) facilities across Malaysia.
Is your laboratory's exhaust system meeting the 2026 safety and durability standards? Contact EKG M&E Sdn Bhd today for a professional composite FRP ducting audit and a technical proposal that prioritizes safety, durability, and compliance.
Tingnan ang karagdagang mga detalye tungkol sa EKG M & E SDN BHD
Malaysia
