In the 2026 clinical landscape, a Virus Control AHU is defined as an advanced "Mechanical Firewall" engineered to mitigate the transmission of infectious aerosols. In Malaysia, these units must now meet the dual-compliance of ASHRAE 241 (Control of Infectious Aerosols) and the mandatory EECA 2024 (Energy Efficiency and Conservation Act).
At EKG (Malaysia) SDN BHD, we engineer these systems to treat air not just as a thermal medium, but as a biological vector that requires active neutralization.
Virus control cannot rely on a single component. It requires a tiered sequence that combines physical capture with biological destruction.
Primary Barrier (MERV 14 / F9): These high-efficiency filters act as the first line of defense, capturing the larger respiratory droplets (typically $> 5\ \mu m$) that carry high viral loads.
Active Neutralization (UVGI): We integrate high-intensity UV-C lamps (254nm) directly facing the cooling coils. This ensures that any virus particles passing through the air stream or settling on damp surfaces are hit with a lethal dose of radiation, disrupting their DNA/RNA.
Terminal Barrier (H13/H14 HEPA): For isolation wards or surgical suites, 99.99% of sub-micron particles (as small as $0.3\ \mu m$) are captured, effectively blocking individual virions and fine aerosol carriers.
Standard AHUs focus on "Air Changes per Hour" (ACH). Under the 2026 ASHRAE 241 standard, we now design for Equivalent Clean Airflow Rate (ECAi).
Total Clean Air Delivery: This metric accounts for the combined effect of outdoor air, HEPA-filtered air, and UV-sterilized air.
Pathogen Dilution: By maximizing the ECAi, we ensure that the concentration of infectious aerosols in a room stays below the "Infectious Dose" threshold, even during high-occupancy events.
| Feature | Standard Commercial AHU | EKG Virus Control AHU |
| Filtration Level | MERV 8 - 13 | MERV 14 + H13 HEPA |
| Biological Action | None (Passive) | Active UVGI (C-Band 254nm) |
| Casing Standard | L3 Leakage | L1 Precision Sealed (Airtight) |
| Pressure Control | General Comfort | Active Negative/Positive Regime |
| Surface Safety | Galvanized Steel | SUS 304/316 (VHP Resistant) |
| Energy Strategy | Baseline | EECA 2024 Star-Rated (Low BEI) |
Adding dense HEPA filters and high-output UV lamps significantly increases air resistance. To remain compliant with Malaysia's Energy Commission audits, we utilize:
IE5 EC Fan Arrays: These direct-drive fan walls provide the necessary static pressure (up to $2,500\ Pa$) while consuming 30% less energy than legacy belt-driven fans.
N+1 Redundancy: If one fan module fails, the others ramp up automatically. This ensures that the virus containment pressure (e.g., -15 Pa for Isolation Rooms) is never lost.
EnMS Integrated Reporting: Our units feed real-time energy usage and filter "loading" data into your Energy Management System (EnMS) for mandatory statutory reporting.
TB2 Thermal Break: Our 50mm double-skin panels with TB2 breaks prevent casing "sweat" in Malaysia's humidity. External moisture is a breeding ground for mold, which can act as a secondary biological risk.
VHP Compatibility: For facilities that utilize Vaporized Hydrogen Peroxide (VHP) for full-room decontamination, our units are built with chemical-resistant SUS 316L internals and silicone gaskets that do not degrade under oxidative stress.
Technical Integrity: We provide the Validation Documentation (IQ/OQ) and DOP Test Ports required for MOH clinical certification.
3D BIM Coordination: We model the air paths to ensure maximum UV "dwell time" (exposure) for the air stream, maximizing the kill rate.
BOMBA-Compliant Safety: All internal materials, including non-shedding insulation, are fire-rated (Class 0 or B1).
Is your facility's air handling infrastructure an active defense or a potential vector? Contact EKG (Malaysia) SDN BHD today. We specialize in engineering virus control systems that are sterile, silent, and ultra-efficient for the 2026 standards.
更多 EKG M & E SDN BHD 相关资料
Malaysia
