In the 2026 Malaysian engineering landscape, Seismic Restraint Installation for Air Handling Units (AHUs) has transitioned from an "optional best practice" to a critical statutory requirement. Under the Energy Efficiency and Conservation Act (EECA) 2024 and the updated Uniform Building By-Laws (UBBL) 2026, mechanical assets must be secured against seismic events to prevent life-safety hazards and "Energy Theft" caused by catastrophic system failure.
At EKG (Malaysia) SDN BHD, we treat seismic restraint as a foundational mechanical safety audit, ensuring your high-performance assets remain Sterile, Silent, and Statutory-Compliant.
As of January 1, 2026, all new high-rise developments in Malaysia must satisfy the seismic design requirements of MS EN 1998-1:2015 (Eurocode 8) and its Malaysian National Annex.
Seismic Hazard Zones: Depending on your building's location (e.g., higher risk zones in Sabah vs. low-to-moderate zones in the Klang Valley), the Importance Factor for HVAC equipment is legally defined. AHUs in "Importance Class III" buildings (hospitals, schools, command centers) must remain functional after a seismic event.
UBBL 2026 Amendment: Local authorities now mandate a Seismic Compliance Certificate for mechanical installations before the Certificate of Completion and Compliance (CCC) is issued.
EECA 2024 Resilience: The Act mandates that energy-saving assets—like your IE5 EC Fan Walls—be protected. A unit that "walks" or shifts during a tremor can rupture chilled water lines and duct gaskets, leading to massive energy waste and statutory non-compliance.
Seismic restraints are designed to handle both Lateral (side-to-side) and Vertical forces during an earthquake, preventing the unit from tipping, sliding, or "jumping" off its mounting.
Snubbers & All-Directional Restraints: For units mounted on High-Deflection Spring Isolators, we utilize seismic snubbers. These provide a "clearance gap" during normal operation to maintain an NC 30-35 acoustic profile but "lock" the unit in place once a specific displacement limit is reached.
Slack Cable Restraints (Suspended Units): For ceiling-hung AHUs, we install four-point aircraft-quality cable braces. This prevents the unit from swaying and colliding with structural beams or neighboring MEP services.
Rigid Bracing (Floor Mounted): For large rooftop AHUs, we utilize steel angles or strut channels anchored directly into the structural slab with Seismic-Rated Expansion Anchors.
| Component | 2026 Requirement | Engineering Purpose |
| Seismic Anchors | Cracked-Concrete Rated (ETA/ICC) | Ensures the anchor will not pull out if the floor slab develops tremors. |
| Clearance Audit | 6mm to 10mm Air Gap | Prevents "vibration bridging" during normal silent operation. |
| Fastener Torque | Calibrated Torque Testing | Prevents "fastener creep" during micro-seismic activity. |
| Digital Twin Scan | LOD 500 Validation | Provides the "Digital Birth Certificate" proof for the 5-year energy/safety audit. |
Technical Integrity: Our seismic solutions are engineered by mechanical and structural specialists who calculate the exact $G$-force loads for your specific building height and soil type.
Zero-Conflict Mounting: We specialize in the "Silent Office" standard. Our seismic restraints are designed to provide maximum safety without compromising the vibration isolation that keeps your workplace quiet.
GITA Support: Documented seismic compliance is part of the "Good Engineering Practice" required to secure the 100% Green Investment Tax Allowance.
Is your AHU secured for 2026 safety standards or is it a structural liability? Contact EKG (Malaysia) SDN BHD today for specialized Seismic Restraint Installation & Audit.
Are you installing seismic restraints for a new Grade-A office development or retrofitting an existing facility for enhanced safety?
更多 EKG M & E SDN BHD 相关资料
Malaysia
