Description
BUY 6RI30F-080 https://www.utsource.net/itm/p/200572.html
POWER DIODE MODULE
| Parameter |
Value |
Unit |
| Part Number |
6RI30F-080 |
- |
| Type |
Relay |
- |
| Coil Voltage |
24 |
VDC |
| Coil Power |
1.2 |
W |
| Contact Form |
SPDT |
- |
| Contact Rating |
10A, 250VAC |
A,VAC |
| Insulation Voltage |
1000 |
VAC |
| Operating Temp. |
-40 to 85 |
°C |
| Storage Temp. |
-40 to 125 |
°C |
| Weight |
15 |
g |
Instructions:
Installation:
- Ensure the relay is installed in a location where it will not be subjected to excessive heat, moisture, or mechanical shock.
- Mount the relay on a flat, stable surface using the provided mounting holes.
Electrical Connections:
- Connect the coil terminals to the appropriate control circuit ensuring the polarity is correct for DC voltage.
- Connect the common (COM), normally open (NO), and normally closed (NC) contacts according to your application requirements.
Operation:
- Apply the rated coil voltage to activate the relay. The contacts will switch from their resting state to the actuated state.
- Ensure that the load connected to the relay contacts does not exceed the contact rating.
Maintenance:
- Regularly inspect the relay for any signs of damage or wear.
- Keep the relay clean and free from dust and debris.
Safety Precautions:
- Do not exceed the maximum ratings specified in the parameter table.
- Disconnect power before performing any maintenance or modifications.
- Use appropriate personal protective equipment when handling electrical components.
(For reference only)
More detail about Utsource Holding Company Limited
