SKM200GB101D: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Description	Value
Device Name	IGBT Module	SKM200GB101D
Manufacturer	Infineon Technologies AG
Type	IGBT Module
Package Type	PressFIT, 6-Pin, ISOMOUNT?
Current - Collector to Emitter (Ic)	Continuous Collector Current @ Tc = 25°C	200 A
Voltage - Collector-Emitter (Vceo)	Collector-Emitter Voltage	1200 V
Power Dissipation (Ptot)	Total Power Loss @ Tc = 25°C	430 W
Thermal Resistance (Rth,j-c)	Junction to Case Thermal Resistance	0.18 K/W
Switching Frequency	Recommended Maximum Switching Frequency	10 kHz
Operating Temperature (Tj)	Junction Operating Temperature Range	-40°C to 150°C
Storage Temperature (Tstg)	Storage Temperature Range	-55°C to 150°C

Installation:
- Ensure the mounting surface is clean and flat.
- Apply thermal paste if necessary between the module and heatsink for optimal heat dissipation.
- Tighten the screws evenly to avoid warping.
Electrical Connections:
- Connect the collector, emitter, and gate terminals according to the circuit diagram.
- Verify all connections are secure to prevent arcing or short circuits.
Cooling Requirements:
- Use an adequate heatsink or cooling system to maintain junction temperature within specified limits.
- Monitor temperature during operation to ensure it does not exceed the maximum operating temperature.
Operation:
- Operate within the specified current and voltage limits.
- Avoid rapid changes in current to prevent thermal stress on the device.
Safety Precautions:
- Handle with care to avoid damaging the press-fit pins.
- Use appropriate safety equipment when working with high voltages.
Maintenance:
- Regularly inspect connections and cooling systems.
- Replace any damaged components immediately to prevent further issues.

(For reference only)