DRV135UAG4: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Min	Typical	Max	Unit	Description
Supply Voltage	VDD	2.7		5.5	V	Operating supply voltage range
Quiescent Current	IQ		100		μA	Supply current with no load
Output Current	IOUT		250	500	mA	Maximum continuous output current
Output Voltage	VOUT				V	Output voltage, depends on input voltage and load
Enable Input Voltage	VEN	0.8		2.0	V	Threshold for enabling the device
Shutdown Current	ISD		1.0		μA	Supply current when the device is disabled
Thermal Shutdown	TSD		160		°C	Temperature at which the device shuts down to prevent damage
Operating Temperature	TOPR	-40		125	°C	Ambient temperature range for normal operation
Storage Temperature	TSTG	-65		150	°C	Temperature range for storage

Power Supply:
- Connect the VDD pin to a power supply within the range of 2.7V to 5.5V.
- Ensure that the power supply is stable and can provide sufficient current to meet the maximum output current requirements.
Enable Pin (EN):
- Apply a voltage greater than 0.8V to the EN pin to enable the device.
- To disable the device, apply a voltage less than 0.8V or leave the EN pin floating.
Output Configuration:
- Connect the load to the OUT pin.
- Ensure that the load does not exceed the maximum continuous output current of 500mA.
Thermal Management:
- Monitor the operating temperature to ensure it does not exceed 125°C.
- If the device reaches the thermal shutdown temperature (160°C), it will automatically shut down to prevent damage.
Storage:
- Store the device in an environment where the temperature ranges from -65°C to 150°C.
Handling:
- Handle the device with care to avoid static discharge, which can damage the internal components.
- Use proper ESD protection measures during handling and installation.
Testing:
- Before integrating the device into a final application, perform thorough testing to ensure it meets the required performance specifications.
Layout Considerations:
- Place the device close to the load to minimize trace resistance and inductance.
- Use appropriate decoupling capacitors near the VDD pin to filter out noise and stabilize the power supply.

(For reference only)