TLP291GB-TP.SE
TLP291GB-TP.SE

 

TLP291GB-TP.SE

Utsource Holding Company Limited flag
Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY TLP291GB-TP.SE https://www.utsource.net/itm/p/9773951.html

Parameter Symbol Min Typ Max Unit Conditions
Forward Current IF - 10 30 mA Tj = 25°C
Peak Forward Current IFP - - 100 mA tP = 1 ms, Tj = 25°C
Forward Voltage VF 1.1 1.3 1.5 V IF = 10 mA, Tj = 25°C
Reverse Voltage VR - - 5 V Tj = 25°C
Output Current (High Level) IOH - 1.6 3.2 mA VOUT = 2.4 V, IOUT = 1.6 mA, Tj = 25°C
Output Current (Low Level) IOL - -5 -10 mA VOUT = 0.4 V, IOUT = -5 mA, Tj = 25°C
Output Voltage (High Level) VOH 2.4 2.7 3.0 V IOH = 1.6 mA, Tj = 25°C
Output Voltage (Low Level) VOL 0.1 0.2 0.4 V IOL = -5 mA, Tj = 25°C
Propagation Delay Time (High to Low) tPLH - 0.2 0.5 μs VCC = 5 V, IF = 10 mA, RL = 500 Ω, Tj = 25°C
Propagation Delay Time (Low to High) tPHL - 0.2 0.5 μs VCC = 5 V, IF = 10 mA, RL = 500 Ω, Tj = 25°C
Storage Temperature Range Tstg -40 - 85 °C -
Operating Temperature Range Topr -40 - 85 °C -

Instructions for Use:

  1. Power Supply:

    • Ensure the supply voltage (VCC) is within the specified range (typically 4.5 V to 5.5 V).
    • Connect the power supply to the VCC and GND pins.

  2. Input Signal:

    • Apply the input signal to the Anode (A) and Cathode (K) pins.
    • The forward current (IF) should not exceed 30 mA to avoid damaging the device.
    • For high-speed applications, ensure the peak forward current (IFP) does not exceed 100 mA for more than 1 ms.

  3. Output Signal:

    • Connect the output load between the Output (O) pin and GND.
    • The output current (IOH) when high should be within the range of 1.6 mA to 3.2 mA.
    • The output current (IOL) when low should be within the range of -5 mA to -10 mA.

  4. Propagation Delay:

    • The propagation delay times (tPLH and tPHL) are critical for timing considerations in your circuit. Ensure that these values meet your system requirements.

  5. Temperature Considerations:

    • Operate the device within the specified temperature range (-40°C to 85°C) to ensure reliable performance.
    • Store the device within the storage temperature range (-40°C to 85°C).

  6. Handling and Storage:

    • Handle the device with care to avoid mechanical damage.
    • Store the device in a dry, cool place to prevent moisture damage.

  7. Electrostatic Discharge (ESD) Protection:

    • Use appropriate ESD protection measures when handling the device to prevent damage from static electricity.

  8. Mounting:

    • Follow the recommended soldering profile and mounting guidelines to ensure proper installation and reliability.
(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag