CY62157EV30LL-45ZXI

CY62157EV30LL-45ZXI

Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us

Description

BUY CY62157EV30LL-45ZXI https://www.utsource.net/itm/p/11655236.html

Parameter Description Value
Device Type 16K x 8 CMOS SRAM -
Package 30-pin Plastic SOP (Small Outline Package) -
Operating Voltage (Vcc) Supply Voltage Range 2.5V to 3.6V
Standby Current (Icc) Typical at Vcc = 3.0V, Ta = 25°C 1 μA
Active Current (Icc) Typical at Vcc = 3.0V, f = 10 MHz, Ta = 25°C 10 mA
Access Time (tAA) Access Time at Vcc = 3.0V, f = 10 MHz, Ta = 25°C 45 ns
Data Retention Time Data Retention at Vcc = 2.5V, Ta = 25°C 20 years
Operating Temperature Range (Ta) Industrial Temperature Range -40°C to +85°C
Storage Temperature Range (Tstg) Storage Temperature -65°C to +150°C
Input Voltage (VIH, VIL) High-Level Input Voltage, Low-Level Input Voltage VIH: 2.0V to Vcc, VIL: 0V to 0.8V
Output Voltage (VOH, VOL) High-Level Output Voltage, Low-Level Output Voltage VOH: Vcc - 0.2V, VOL: 0.2V
Write Cycle Time (tWC) Write Cycle Time at Vcc = 3.0V, f = 10 MHz, Ta = 25°C 45 ns
Read Cycle Time (tRC) Read Cycle Time at Vcc = 3.0V, f = 10 MHz, Ta = 25°C 45 ns
Address Setup Time (tAS) Address Setup Time at Vcc = 3.0V, f = 10 MHz, Ta = 25°C 15 ns
Address Hold Time (tAH) Address Hold Time at Vcc = 3.0V, f = 10 MHz, Ta = 25°C 0 ns
Output Enable (OE) Delay Time (tOHZ, tOLZ) Output Enable to Output Valid, Output Enable to Output Invalid tOHZ: 15 ns, tOLZ: 15 ns
Write Enable (WE) Delay Time (tWHZ, tWLZ) Write Enable to Output Valid, Write Enable to Output Invalid tWHZ: 15 ns, tWLZ: 15 ns
Power-down Mode Enters Power-down Mode when CE# is High -
Pin Configuration Pinout Diagram Refer to Datasheet for Pinout Diagram

Instructions:

  1. Power Supply: Ensure the supply voltage (Vcc) is within the specified range of 2.5V to 3.6V.
  2. Temperature Range: Operate the device within the industrial temperature range of -40°C to +85°C.
  3. Signal Levels: Use appropriate signal levels for inputs (VIH, VIL) and outputs (VOH, VOL) as specified.
  4. Timing Requirements: Adhere to the timing parameters such as access time (tAA), write cycle time (tWC), and read cycle time (tRC) to ensure reliable operation.
  5. Power-down Mode: To enter power-down mode, set the chip enable (CE#) pin high.
  6. Storage: Store the device in a temperature-controlled environment within the storage temperature range of -65°C to +150°C.
  7. Pin Configuration: Refer to the datasheet for the detailed pin configuration and pinout diagram.

For more detailed information, refer to the official datasheet provided by the manufacturer.

(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited