Description
When it comes to high melting performance, gas-fired melting furnaces with exhaust gas routing via the crucible rim are the first choice, whether as pre-melting furnaces or also for direct casting into the mould. The excellent insulation as well as the favourable burner arrangement result in the best possible performance values with high Energy efficiency.
For use as a holding furnace with liquid material input, the burner output is reduced.
In the version with lateral flue gas routing, the quality of the melt is increased.
The gas-fired tilting furnaces are also characterised by low-noise operation.
Technical features
- Robust furnace constructions
- Oil or gas-fired with high melting capacity
- Safe pouring through the use of 2 hydraulic cylinders with end bearing dampers on the tipping frame
- Precise dosing and thus uniform pouring
- Low energy consumption, low fuel costs due to excellent thermal insulation
- Low heat loss due to high-quality furnace insulation
- Powerful, modern Weishaupt burners with safe, optimised flame monitoring and quiet operation
- Delivery with gas line incl. pressure regulator, gas filter, pressure gauge and solenoid valves
- Uniform heating of the melt and the crucible due to circulating flame guidance
- Crucible optimally protected by refractory concrete cover plate
- Ladle hole rim covered with heat-resistant cast iron ring, thus protected from damage
- Practical emergency spout
- Side flue on models TAG 180/12/K – TAG 1000/12/K
- Exhaust gas routing over crucible rim models TKG 400/14/K – TKG 600/14/K, lateral exhaust gas routing available as an option
Options
- Melt bath control incl. bath thermocouple for direct and precise temperature control in the melt
- Gas – Meter for calculation and cost monitoring
- Working platforms for convenient loading
- Pneumatic lid opening
- Switchgear cabinet cooling unit
- Standard crucibles from well-known brand manufacturers
- Crucible leakage detection with alarm message
Technical Data
| TECHNICAL DATA |
| Model |
Crucible |
Capacity |
Melting power* |
Power |
Tmax |
External dimensions [mm] |
| kg Al |
kg Cu |
kg/h Al |
kg/h Cu |
Furnace Chamber |
Width 1 |
Width |
Depth |
Max. height |
| TAG 180/12/K |
TP 287 |
180 |
|
220 |
|
300 |
1200 |
2900 |
2100 |
1600 |
3450 |
| TAG 330/12/K |
TP 412 |
330 |
|
240 |
|
300 |
1200 |
3000 |
2200 |
1700 |
3730 |
| TAG 370/12/K |
TP 412 H |
370 |
|
260 |
|
300 |
1200 |
3000 |
2200 |
1700 |
3830 |
| TAG 570/12/K |
TP 587 |
570 |
|
400 |
|
390 |
1200 |
3200 |
2400 |
2100 |
4070 |
| TAG 750/12/K |
TBN 800 |
750 |
|
420 |
|
450 |
1200 |
3300 |
2500 |
2250 |
4270 |
| TAG 1000/12/K |
TBN 1100 |
1000 |
|
450 |
|
450 |
1200 |
3300 |
2500 |
2250 |
4450 |
| TKG 400/14/K |
TP 723 |
|
400 |
|
330 |
400 |
1400 |
2800 |
2000 |
1600 |
3400 |
| TKG 500/14/K |
TP 843 |
|
500 |
|
360 |
400 |
1400 |
2800 |
2000 |
1600 |
3400 |
| TKG 600/14/K |
TP 287 |
|
550 |
|
380 |
400 |
1400 |
2900 |
2100 |
1600 |
3500 |
|
Other sizes on request.
Width 1 includes side-mounted burner – height without lid to top edge of collar plate.
*The melting capacity refers to normal industry use in continuous operation with at least 30% molten metal (swamp) in the crucible. The furnace chamber temperature is at least 50 °C above the set melting temperature.
|
More detail about LINGTEC INSTRUMENTS SDN BHD
Malaysia
