Bale Out Crucible Furnace Electric Heating: Top Choice in Selangor, Penang, Malaysia, Singapore (SG), Phillipines, Thailand LINGTEC INSTRUMENTS SDN BHD

Description

Technical features

Robust furnace constructions
Good accessibility to the melting bath due to small external dimensions
Comfortable working on the furnace due to very low outer wall temperature
Low energy consumption, low electricity costs due to excellent thermal insulation
Low heat loss, excellent efficiency
High-quality heating elements mounted on ceramic support tubes, with free heat radiation into the furnace chamber and high energy efficiency.
Low surface load of the heating elements for reduced wear and longer service life.
Very uniform heating of the melt and the crucible due to all-round heating from 4 sides of the crucible ensures an excellent metal quality.
Crucible optimally protected by refractory concrete cover plate, removable for inspection and repair work
Ladle hole rim covered with heat-resistant cast iron ring and protected from damage
Cast iron ring embedded in cover plate
Heating elements can be replaced individually and very easily
Practical emergency outlet for safe discharge of the melt in the event of crucible leakage
Connecting cable between switchgear and furnace in protective metal conduit, optimum protection against damage
Low maintenance costs

Also available as holding furnaces with lower connected loads

Options

Melt bath control incl. bath thermocouple for direct and precise temperature control in the melt
Increased connected load for higher melting capacity
Multi-stage switchgear to minimise the load on the grid
Thyristor control for gentle control of the heating and silent operation
Operating hours counter for monitoring crucible service life
kWh – Meter for calculation and cost monitoring
Switchgear cabinet cooling unit
Pneumatic lid opening
Standard crucibles from well-known brand manufacturers
Crucible leakage detection with alarm message
Special collar plate and lid for pulling the crucible with subsequent pouring

Technical Data 1

TECHNICAL DATA
Model	Crucible	Capacity		Melting power*		Power	Tmax	External dimension (mm)	Model	Crucible	Capacity		Melting power*		Power	Tmax	Furnace chamber	External dimension (mm)
Model	Crucible	kg Al	kg Cu	kg/h Al	kg/h Cu	Power	Furnace chamber	Width × Depth × Height	Model	Crucible	kg Al	kg Cu	kg/h Al	kg/h Cu	Power	Furnace Chamber	Width × Depth × Height
TA 30/11	A 70	20		34		18	1100	860 × 860 × 840	TK 70/12	A 70	30	105	34	47	18	1200	860 × 860 × 810
TA 50/11	A 150	45		42		20	1100	980 × 980 × 850	TK 150/12	A 150	60	210	42	63	20	1200	860 × 860 × 870
TA 100/11	A 200	90		58		27	1100	980 × 980 × 920	TK 300/12	A 300	105	335	58	84	26	1200	1010 × 1010 × 910
TA 200/11	BU 200	200		130		53	1100	1160 × 1160 × 890	TK 500/12	BU 200	185	625	130	190	54	1200	1160 × 1160 × 950
TA 300/11	BU 300	300		140		63	1100	1250 × 1250 × 1050
TA 350/11	BU 350	350		150		68	1100	1250 × 1250 × 1150	TK 70/13	A 70	30	105	34	47	18	1300	860 × 860 × 840
TA 500/11	BU 500	500		170		72	1100	1320 × 1320 × 1180	TK 150/13	A 150	60	210	42	63	20	1300	980 × 980 × 850
TA 600/11	BU 600	600		210		83	1100	1320 × 1320 × 1310	TK 300/13	A 300	105	335	58	84	26	1300	980 × 980 × 920
TA 800/11	BU 800	800		260		102	1100	1430 × 1430 × 1420	TK 500/13	BU 200	185	625	130	190	54	1300	1160 × 1160 × 890
Other sizes on request. Height without lid to top edge of collar plate.									* The melting capacity refers to normal industry use in continuous operation with at least 30 % molten metal (swamp) in the crucible. The furnace chamber temperature is at least 50 °C above the set melting temperature.

TECHNICAL DATA
Model	Crucible	Capacity		Melting power*		Power	Tmax	External dimensions [mm]	Model	Crucible	Capacity		Melting power*		Power	Tmax	External dimensions [mm]
Model	Crucible	kg Al	kg Cu	kg/h Al	kg/h Cu	Power	Furnace chamber	Width × Depth × Height	Model	Crucible	kg Al	kg Cu	kg/h Al	kg/h Cu	Power	Furnace chamber	Width × Depth × Height
TAG 200/12	BU 200	200		140		180	1200	2100 × 1300 × 1100	TKG 100/14	A 100	30	100	90		210	1400	1900 × 1100 × 700
TAG 250/12	BU 200	250		140		180	1200	2100 × 1300 × 1100	TKG 150/14	A 150	45	150	100		210	1400	1950 × 1100 × 800
TAG 300/12	BU 300	300		150		210	1200	2100 × 1300 × 1300	TKG 400/14	A 400	120	400	300		300	1400	2100 × 1300 × 1100
TAG 350/12	BU 350	350		220		300	1200	2100 × 1300 × 1300	TKG 500/14	A 500	150	500	320		320	1400	2100 × 1300 × 1100
TAG 500/12	BU 500	500		270		300	1200	2250 × 1450 × 1300	TKG 600/14	A 600	180	600	320		320	1400	2100 × 1300 × 1300
TAG 600/12	BU 600	600		330		390	1200	2300 × 1600 × 1450
Other sizes on request. Height without lid to top edge of collar plate.									* The melting capacity refers to normal industry use in continuous operation with at least 30 % molten metal (swamp) in the crucible. The furnace chamber temperature is at least 50 °C above the set melting temperature.