Paint Type: Solvent-based (Thermoplastic Acrylic).
Finishing: Gloss Metallic.
Drying Time: Touch Dry in 15 minutes; Hard Dry in 45 minutes (at 28–32°C).
Recoating Interval: Minimum 2 hours.
Theoretical Coverage: 9 – 11 m² per litre per coat (dependent on surface porosity).
Number of Coats: Minimum 2 coats recommended for optimum opacity and effect.
Shelf Life: Up to 36 months in a tightly sealed container.
Cleaning: Clean all equipment immediately after use with Nippon Acrylic 3000 Thinner.
For Wood: * Primer: 1 coat of Nippon Hydro Primer or Nippon 8048 Zinc Phosphate Primer.
Topcoat: 2 coats of Metallic Paint.
For Metal: * Primer: 1 coat of Nippon Aquatec 1900 Red Oxide Primer or 8048 Zinc Phosphate Primer.
Topcoat: 2 coats of Metallic Paint.
For Masonry/Walls: * Sealer: 1 coat of Nippon 5200 Wall Sealer or 8000 Advanced Sealer.
Topcoat: 2 coats of Metallic Paint.
Cleanliness: Ensure the surface is completely dry and free from dirt, grease, oil, and other contaminants before painting.
Old Paint Removal: Remove all loose, defective, or powdery paint residues and fungal growth using high-pressure water jetting or wire brushing.
Repairing Defects: Repair cracks or uneven surfaces with a suitable filler (e.g., Nippon Multi-Purpose Joint Compound). Sand smooth once dry.
Moisture Content: For masonry, ensure the moisture content is below 16% (measured by protimeter) and alkalinity is below pH 9.
Sanding: For wood and metal, lightly sand the surface with fine-grit sandpaper to improve adhesion, then wipe away all dust.
Malaysia
