Paint Type: Water-based (Acrylic Emulsion).
Product Type: Interior.
Finishing: Matt.
Drying Time: Touch Dry: 30 minutes; Hard Dry: 1 hour (subject to temperature and humidity).
Recoating Interval: Minimum 2 hours.
Theoretical Coverage: 10 – 12 m² per litre per coat (actual coverage depends on substrate condition).
Volume Solids: Approximately 33%.
Application Method: Use a high-quality brush, roller, or conventional air spray for a smooth, even application.
Thinning: * Brush/Roller: Dilute with a maximum of 5% - 10% clean water if necessary.
Conventional Air Spray: Dilute with 10% - 20% clean water.
Cleaning: Clean all painting tools with fresh water immediately after use to prevent paint from hardening on the equipment.
Sealer/Primer (1 Coat): 5200 Wall Sealer / 5400 Wall Sealer / Hi-Bond Wall Sealer (for chalky surfaces).
Topcoat (2 Coats): EasyCoat.
Note: For new walls, ensuring a proper sealer coat is vital to prevent alkaline attack and improve the topcoat's color consistency.
Surface Condition: The substrate must be sound, clean, and completely dry. Remove all loose or peeling paint, dirt, grease, and powdery residue.
Moisture Content: Ensure the moisture content of the wall is below 16% as measured by a protimeter.
Alkalinity Level: The alkalinity of the wall should be below pH 9 to avoid "burning" or discoloration of the paint film.
Fungus/Algae Treatment: If fungus or algae is present, treat the area with Nippon Fungicidal Wash. Thoroughly rinse with water and allow to dry before painting.
Crack Repair: Fill minor cracks, holes, and surface defects with an appropriate interior masonry filler. Sand smooth and dust off before applying the primer.
Malaysia
