Description
PRODUCT DESCRIPTION
Nippon Paint Weatherbond® Ultimate is an ultra-premium, pure acrylic-silicone exterior wall paint engineered for the highest level of durability. Formulated with cutting-edge Quartz and Fibra Technology, it creates a reinforced, microfibre-embedded paint film that provides mechanical strength and extraordinary protection against extreme tropical weather. Offering up to 15 years of protection, this mid-sheen finish paint acts as a resilient shield for your home, featuring Sunblock Technology to reduce surface temperatures and Colour Care Technology for long-lasting vibrancy. It is the ultimate choice for homeowners seeking a keep-clean exterior that resists dirt, fungus, algae, and UV degradation.
Technical Data
-
Paint Type: Water-based (Exterior)
-
Finishing: Mid Sheen
-
Binder: Acrylic polymer coupled with Silicone resin
-
Thinning: Maximum 5% with clean water (ready to use, thinning not recommended for best performance)
-
Touch Dry: 20 minutes (depending on temperature and humidity)
-
Hard Dry: 1 hour
Application Instruction
-
Application Method: Use a high-quality Brush or Roller.
-
Important Note: This product is not suitable for spray application because the microfibres in the paint may block the spray gun nozzle.
- Dilution: For best results, use as supplied. If necessary, dilute with no more than 5% water.
-
Cleaning: Clean all equipment with water immediately after use.
Recommended Coating System
-
Sealer/Primer (1 Coat): 8100 Weatherbond Sealer / 5100 Wall Sealer / 8000 Advance Wall Sealer. For powdery or skim-coated surfaces, use Hi-Bond Wall Sealer or Acrylic 5170 Wall Sealer.
-
Topcoat (2 Coats): Weatherbond Ultimate.
Surface Preparation
-
Surface Condition: Ensure the surface is dry and free from dirt, grease, and loose matter.
-
Cleaning: Remove all loose, defective paint or powdery residues. Treat areas affected by fungus or algae with a fungicidal wash solution.
-
Repair: Fill cracks and uneven surfaces with suitable exterior-grade fillers and sand until smooth.
-
Moisture & Alkalinity: Ensure wall moisture content is below 16% and alkalinity is below pH 9 before painting. New walls should be allowed to cure for at least 28 days.
Ready to order or need expert advice?
Contact us on WhatsApp now for fast response, latest prices, and product recommendations. Our team is ready to support your project with the right solution—quickly and hassle-free!
More detail about Heng Sheng Hardware Sdn Bhd