Nippon Paint Weatherbond® Solareflect Extreme is a premium, pure acrylic-based exterior paint specifically engineered to combat the effects of intense tropical heat and sunlight. Featuring advanced Sunblock Technology, it is clinically proven to reduce wall surface temperatures by up to 5°C, resulting in cooler interiors and improved energy efficiency for the building. This high-performance coating is formulated with Quartz Technology, creating a tough and durable paint film that offers 12 years of protection against harsh weather. It provides superior resistance to UV radiation, dirt penetration, and environmental pollutants, ensuring exterior walls remain vibrant and clean for over a decade.
Paint Type: Water-based (Exterior)
Finishing: Sheen
Binder: Pure Acrylic Emulsion
Thinning: Maximum 5% with clean water (preferably not diluted for best performance)
Touch Dry: 20 minutes (depending on temperature and humidity)
Hard Dry: 1 hour
Recoating Interval: Minimum 2 hours
Theoretical Coverage: 10 – 12 m² per litre per coat
No. of Coats: 2 coats
Shelf Life: Up to 36 months in a tightly sealed container
Application Method: Apply using a high-quality Brush or Roller.
Dilution: Use as supplied for optimum results. If necessary, dilute with no more than 5% water to improve workability.
Cleaning: Clean all painting equipment with clean water immediately after use.
Environmental Conditions: Avoid painting when the temperature is below 10°C or above 35°C, or when relative humidity exceeds 85%.
Sealer/Primer (1 Coat): 8100 Weatherbond Sealer / 5100 Wall Sealer / 8000 Advance Wall Sealer / Expresskote Sealer. For powdery or skim-coated surfaces, use Hi-Bond Wall Sealer or Acrylic 5170 Wall Sealer.
Topcoat (2 Coats): Weatherbond Solareflect Extreme.
General Cleaning: Surface must be dry, clean, and free from grease, oil, dust, and loose matter.
Defect Removal: Remove all loose or defective paint and powdery residues by scraping or high-pressure water jetting.
Biological Treatment: Treat areas affected by fungus or algae growth with a suitable fungicidal wash solution.
Repair: Fill cracks and uneven surfaces with exterior-grade fillers (such as Nippon CrackREPAIR) and sand until smooth.
Moisture & Alkalinity: Ensure wall moisture content is below 16% (protimeter) and alkalinity is below pH 9 before application. New walls should be allowed to cure for at least 28 days.
Malaysia
