Nippon Paint Roadline Paint (Reflective) is a high-performance, fast-drying alkyd-based coating specifically designed for road marking and traffic safety. This product contains premium glass beads that provide excellent retro-reflectivity, ensuring high visibility during nighttime and in low-light conditions. It is engineered to be highly durable, withstanding heavy traffic wear, oil, and grease. Its quick-drying property minimizes traffic disruption during application. Formulated for both bitumen and concrete surfaces, it is ideal for use on roads, highways, parking lots, and factory floor markings.
Paint Type: Solvent-based (Alkyd)
Finishing: Matt (Reflective)
Binder: Alkyd Resin
Thinning: Ready for use. If thinning is required, use maximum 5% Nippon Roadline Thinner.
Touch Dry: 5 – 10 minutes (depending on temperature and humidity)
Hard Dry: 30 minutes
Recoating Interval: Minimum 1 hour
Theoretical Coverage: 9 – 11 m² per litre per coat
No. of Coats: 1 to 2 coats
Shelf Life: Up to 24 months in a tightly sealed container
Application Method: Apply using a high-quality Brush, Roller, or Conventional Air Spray.
Dilution: Stir the paint thoroughly before use. It is recommended to use the paint as supplied. If thinning is necessary for spray application, use Nippon Roadline Thinner.
Cleaning: Clean all tools and application equipment with Nippon Roadline Thinner or Turpentine immediately after use.
Safety Note: This product is flammable. Ensure adequate ventilation and keep away from heat, sparks, and open flames during application.
Primer (Optional): Usually not required for bitumen surfaces. For concrete surfaces, ensure the substrate is sound or apply 5100 Wall Sealer if the surface is chalky.
Topcoat (1-2 Coats): Roadline Paint (Reflective).
Note: Ensure the thickness of the wet film is consistent to maintain uniform reflectivity across the marked area.
General Cleaning: Surfaces must be dry, clean, and free from dirt, grease, oil, and loose matter.
Debris Removal: Remove all loose or defective paint, powdery residues, and dust by sweeping or using compressed air.
Oil & Grease: Remove oil and grease stains with a suitable detergent or solvent and allow the surface to dry completely before painting.
Moisture Content: Ensure the road surface is dry. Do not apply during wet weather or if the surface is damp, as this will significantly affect adhesion.
Concrete Surfaces: New concrete must be allowed to cure for at least 28 days before application.
Malaysia
