Nippon Paint Tile Primer

PRODUCT DESCRIPTION

Nippon Paint Tile Primer is a high-performance, two-pack water-thinned epoxy primer specifically engineered to serve as a superior adhesion barrier. It is the ideal solution for homeowners and professionals looking to renovate kitchens, bathrooms, or floors without the mess and cost of hacking existing tiles.

Designed as a universal primer, it provides a powerful bond on challenging, non-porous surfaces such as glazed tiles, glazed brickwork, and smooth concrete. It acts as a bridge, allowing high-quality topcoats to adhere perfectly to slippery surfaces while offering low-odour and eco-friendly benefits.

TECHNICAL DATA

• Paint Type: Water-based (Two-component)

• Product Type: Interior & Exterior

• Finishing: Matt (White)

• Mixing Ratio: 9 parts Base to 1 part Hardener (by volume)

• Pot Life: 1 hour after mixing (Must be used within this timeframe)

• Theoretical Coverage:
  • 13.1 m² per litre (at 35µm DFT)

  • 11.5 m² per litre (at 40µm DFT)

• Drying Time:
  •       Touch Dry: 1 hour

  • Hard Dry: 4 hours

• Recoating Interval: Minimum 8 hours

• Shelf Life: Up to 24 months in a tightly sealed container

APPLICATION INSTRUCTIONS

• Mixing: Pour the Hardener into the Base component. Stir thoroughly for at least 3-5 minutes until a homogeneous mixture is achieved.

• Application Method: Brush or Roller are recommended for a consistent film.

• Thinning:
  •       Brush/Roller: Ready for use after mixing (no thinning needed).

  • Conventional Spray: Thin with 25–30% water if necessary.

• Cleaning: Clean all tools with water immediately after use before the paint dries.

RECOMMENDED COATING SYSTEM

For a long-lasting and professional finish, follow this sequence:

1. Primer (1 Coat): Nippon Paint Tile Primer.

2. Topcoat (2 Coats): 

•       Option A (Water-based): Nippon Paint Aqua Epoxy.
• Option B (Solvent-based): Nippon Paint EA-4 Finish or Nippon Paint PU Recoatable Finish.

      
SURFACE PREPARATION

• Cleanliness: Ensure the surface is free from grease, oil, wax, and dust. Use a strong detergent or degreaser to scrub the tiles thoroughly.

• Dryness: The surface must be completely dry before application. Moisture content should be below 4%.

• Fungus/Algae: If present, treat with Nippon Paint Fungicidal Wash and rinse thoroughly.

• Stability: Remove any loose or peeling material. While hacking isn't required, ensuring the existing tiles are firmly bonded to the substrate is essential for the longevity of the new coating.

      Ready to order or need expert advice?
Contact us on WhatsApp now for fast response, latest prices, and product recommendations. Our team is ready to support your project with the right solution—quickly and hassle-free!