In 2026, Low-Friction Inner Core Flex Ducts represent a critical mechanical upgrade for high-performance HVAC systems. Under the Energy Efficiency and Conservation Act (EECA) 2024, the "System Effect"—energy loss caused by internal duct turbulence—is a primary metric in building energy audits. For Grade-A offices and industrial facilities in Kuala Lumpur and Selangor, utilizing low-friction cores is the most effective way to lower Specific Fan Power (SFP) and maintain a competitive Building Energy Index (BEI).
EKG (Malaysia) Sdn Bhd utilizes 34 years of mechanical expertise to provide instrument-verified, low-friction flexible ducting. We focus on achieving a mirror-smooth internal bore that allows your Variable Frequency Drives (VFDs) to operate at their absolute minimum required hertz.
Standard flexible ducts have a "corrugated" internal surface that creates significant air drag. Low-friction cores are engineered to smooth this air path.
Mirror-Smooth Internal Bore: We utilize multi-layer aluminized polyester or polyethylene liners that are tensioned over the wire helix to minimize "valley depth" between the coils. This reduces the friction factor ($\lambda$) of the duct, allowing air to move faster with less static pressure from the Air Handling Unit (AHU).
Reducing Fan Brake Horsepower (BHP): By lowering internal resistance, we reduce the load on the supply fan. This directly lowers your monthly TNB maximum demand and ensures compliance with the Fan Power Limitation requirements of MS 1525:2024.
Eliminating "Bio-Friction": Rough surfaces trap dust and moisture, leading to bio-film growth. Our low-friction cores are Antimicrobial-Coated (Silver-Ion), ensuring the surface remains clean and aerodynamically efficient for the life of the system, satisfying DOSH 2026 IAQ audits.
To meet SIRIM, MOH, and BOMBA 2026 benchmarks, EKG utilizes rigorous material and installation standards:
To maintain the "Smooth Bore" even in bends, we utilize a Closely Pitched Spring Steel Helix. This prevents the duct from "ovaling" or collapsing under high static pressure, ensuring that the low-friction properties are maintained throughout the entire air path.
Low friction must be matched with high thermal resistance. Our ducts are encased in High-Density Insulation with a reinforced, continuous vapor barrier. This prevents condensation (sweating) in Malaysia's humid ceiling voids, protecting your assets and maintaining the duct's aerodynamic integrity.
To prevent "Pressure Bleed" at the joints, we utilize a Dual-Clamping Protocol. The inner core is mastic-sealed and secured with stainless steel tension bands, ensuring SMACNA Class C airtightness and preventing the energy waste of air leaking into the ceiling plenum.
| Technical Metric | Standard Corrugated Flex | EKG Low-Friction Core Flex |
| Friction Factor ($\lambda$) | High (Turbulent) | Ultra-Low (Laminar Flow) |
| Leakage Standard | Class B / C | SMACNA Class C (Hermetic) |
| Inner Surface | Rough / Porous | Mirror-Smooth / Antimicrobial |
| Thermal Defense | Basic Foil | R-6.0+ Reinforced Vapor Jacket |
| EECA 2024 Status | Regulatory Risk | Audit-Ready / BEI Optimized |
Audit-Ready Reporting: Under the EECA 2024, technical evidence of fan power optimization is mandatory. We provide on-site Testing, Adjusting, and Balancing (TAB) and Duct Leakage Testing (DLT) to serve as proof of performance for your annual energy audit.
Acoustic Excellence: Turbulence is the primary cause of "air rush" noise. By smoothing the air path, our low-friction ducts significantly reduce terminal noise, providing a silent, professional environment for boardrooms and offices.
Asset Protection: Our "Dry-Path" insulation protocols prevent the condensation that leads to structural damage and mold, protecting the long-term value of your property.
34 Years of Technical Depth: Based in the Klang Valley, we understand the specific interactions between mechanical pressure and tropical humidity.
Turnkey Engineering: We provide full technical validation to ensure your facility meets design specifications, from new builds to system replacements.
Digital Twin Integration: We provide full 3D as-built data for your terminal connections, allowing for seamless integration into modern facility management software.
Is your terminal air delivery meeting its design potential, or is it a hidden source of energy waste? Contact EKG (Malaysia) Sdn Bhd today for a technical assessment of your flexible ducting infrastructure.
Xem thêm chi tiết về EKG M & E SDN BHD
Malaysia
