When it comes to high-power appliances like water heaters, safety isn't just a feature—it’s a necessity. Traditional plugs and sockets often struggle with the high current and humid environments of a bathroom.
The reTOUCH 25A Water Heater Connector is engineered to bridge that gap, offering a dedicated, splash-resistant solution that prioritizes your family's protection without compromising on style.
Why Upgrade to a Dedicated Connector?
1. IP25 Splash Resistance & Rubber Sealing
Bathrooms are naturally high-moisture areas. This connector is rated IP25, meaning it is protected against low-pressure water jets and splashing. The internal rubber seal acts as a barrier, preventing water or moisture from entering the socket and causing a short circuit.
2. Advanced Fire Retardancy
Heat management is critical for a 25A connection. The reTOUCH connector features a High Fire Retardant PC Cover and Terminal Block. It is designed to withstand extreme temperatures of up to 850°C for more than 30 seconds, significantly reducing the risk of fire in the event of an electrical fault.
3. Built-in LED Fault Indicator
Knowledge is power. The integrated LED system gives you an instant status update on your connection:
-
Green Light: System is operating normally.
-
Red Light Warning: An "unhealthy" check. A red light on the power symbol warns you of improper electrical connections, such as earthing issues or reversed polarity, allowing you to call a technician before a problem occurs.
4. Mechanical Durability: Proper Anchorage
Loose wires are a common cause of electrical arcing. This connector includes a Proper Anchorage system that secures the power cord firmly in place, preventing it from being accidentally pulled out or loosened over time.
Technical Specifications at a Glance
| Feature |
Performance Detail |
| Current Rating |
25A (Suitable for devices below 5.5kW) |
| Ingress Protection |
IP25 (Splash Resistant) |
| Heat Resistance |
Up to 850°C for >30s |
| Safety Indicator |
Bi-color LED (Green: OK / Red: Fault) |
Peace of Mind for Your Morning Routine
The reTOUCH 25A Water Heater Connector is a small but vital upgrade for any modern home. By combining water resistance, fire-retardant materials, and a smart fault-detection system, it ensures that your hot shower is as safe as it is relaxing.
Stay safe and stay warm! 
with reTouch IP25 Water Heater Connector.
Don’t just settle for a standard switch. Ensure your water heater is installed with a dedicated IP25 Splash Proof Connector for maximum durability and safety! 
reTouch IP25 Water Heater Connector are SIRIM & Suruhanjaya Tenaga approved in Malaysia. It’s the professional way to connect your heater without messy, exposed wires or unsafe plugs.
reTouch IP25 Water Heater Connector FAQ
Safety & Protection
Q1: Why should I use this connector instead of a standard 3-pin plug?
A: Using a standard plug and socket in a bathroom is a major safety hazard due to high humidity and potential water splashes. The reTouch Connector is specifically designed for wet environments, providing a splash-proof, fire-retardant housing that eliminates the risk of electrical short circuits and electrocution.
Q2: What does the "IP25" rating actually mean?
A: The "IP" stands for Ingress Protection.
- 2: Protects against solid objects larger than 12.5mm (like a finger).
- 5: Protects against low-pressure water jets from any direction.
This rating ensures the internal electrical connections stay dry and safe even if water is sprayed toward the unit.
Q3: What is the "Line Fault Indicator" (LFI) and why is it important?
A: This is a critical built-in safety feature. The LED light on the connector monitors your wiring status:
- Light On/Green: Indicates the unit is receiving power and is properly grounded.
- Light Off/Red: Alerts you to a potential earth connection problem or reversed Live/Neutral wires, allowing you to fix wiring issues before they become dangerous.
Technical Performance
Q4: What is the maximum load this connector can handle?
A: It is rated for 25A (approx. 5500W–6000W). This is significantly higher than a standard 15A socket, making it perfect for high-power instant water heaters, storage heaters, and even some air conditioning units.
Q5: Is it compatible with all water heater brands?
A: Yes. It is a universal connection solution compatible with all major brands (e.g., Joven, Alpha, Panasonic, Midea, etc.) as long as the heater falls within the 25A power rating.
Design & Installation
Q6: What colors are available to match my bathroom tiles?
A: To keep your bathroom looking modern, the connector is available in three signature reTouch finishes:
- Gloss White
- Matte Grey
- Gold
Q7: Is this product certified for use in Malaysia?
A: Absolutely. The reTouch Water Heater Connector is SIRIM Approved and Suruhanjaya Tenaga (ST) Certified, ensuring it meets all national electrical safety standards.
Q8: Can I install this myself?
A: While the design is user-friendly, we strongly recommend a certified electrician handle the installation. They will ensure the 4mm² cables are correctly terminated and that the unit is safely integrated into your home's Earth Leakage Circuit Breaker (ELCB) system.
Japan
