Services
Cleanroom Flooring System
Cleanroom Flooring System

 1

Cleanroom Flooring System

Cleanroom Flooring System

ESD, Epoxy & Vinyl Flooring Solutions

Cleanroom Flooring System in Malaysia

EEPS Engineering designs and installs cleanroom flooring systems for controlled environments across Selangor, Kuala Lumpur and Malaysia. Our ESD, epoxy self-leveling and vinyl flooring solutions provide smooth, easy-to-clean and static-controlled surfaces for semiconductor, electronics, pharmaceutical, medical device and industrial facilities.

  • Site and existing subfloor assessment
  • ESD, anti-static, epoxy and vinyl system selection
  • Professional surface preparation and installation
  • Grounding and resistance testing where required
Request a Site Assessment Compare Flooring Systems
Completed cleanroom flooring system installed by EEPS Engineering in Malaysia
A completed controlled-environment flooring area designed for smooth cleaning, operational traffic and long-term facility use.
Direct answer: A suitable cleanroom flooring system should provide a durable, low-particle and easy-to-clean surface while meeting the facility's ESD, chemical-resistance, hygiene, traffic and equipment-loading requirements. Semiconductor and electronics facilities commonly require ESD flooring, while pharmaceutical, biotechnology and heavy-duty production areas often use seamless epoxy or polyurethane flooring systems.
Cleanroom Flooring Malaysia

Flooring Designed Around Your Production Environment

Cleanroom flooring is not simply a decorative finish. It is one of the largest exposed surfaces in a controlled environment and can affect contamination control, electrostatic discharge, operator safety, equipment stability and cleaning efficiency.

EEPS Engineering evaluates the intended process, cleanroom classification, existing substrate, production traffic, cleaning procedures and static control requirements before recommending a flooring system. This helps prevent common problems such as premature delamination, trapped contamination, uneven finishes, failed ESD performance and excessive maintenance.

Our cleanroom flooring service can be coordinated with a complete cleanroom system installation , allowing the floor, wall panels, doors, equipment layout and service routes to be planned as one integrated facility.

Typical Project Requirements

Contamination control ESD performance Chemical resistance Heavy equipment loads Easy cleaning Slip resistance Low particle generation Minimal downtime
Cleanroom Flooring Types

Which Cleanroom Flooring Systems Are Available?

EEPS provides ESD flooring, epoxy self-leveling flooring and ESD vinyl flooring for different cleanroom and industrial applications. The correct option depends on the production risk, floor condition, traffic level, chemical exposure and required electrical resistance.

01

ESD and Anti-Static Flooring

ESD flooring is designed to control electrostatic charge and provide a controlled path for static electricity to dissipate through the flooring and grounding system.

  • Supports electrostatic discharge control programmes
  • Helps protect sensitive components and production equipment
  • Available in conductive or static-dissipative configurations
  • Suitable for semiconductor, electronics and precision assembly areas

ESD, anti-static, dissipative and conductive flooring should not be treated as identical terms. The required resistance range must be determined from the facility's process and project specification.

02

Epoxy Self-Leveling Flooring

Epoxy self-leveling flooring creates a smooth, seamless and non-porous surface that is practical for controlled environments requiring frequent cleaning.

  • Seamless surface with minimal dirt traps
  • Good abrasion and chemical resistance
  • Easy routine cleaning and disinfection
  • Suitable for pharmaceutical, laboratory, medical-device and industrial areas

The coating thickness, primer, build-up system and finish should be selected according to moisture condition, expected loads, chemicals and operational traffic.

03

ESD Vinyl Flooring

ESD vinyl flooring uses factory-manufactured tiles or sheets designed to provide controlled electrical performance and a consistent finished appearance.

  • Appropriate for many electronics and technical work areas
  • Relatively fast installation for prepared substrates
  • Replaceable sections where individual tiles are used
  • Compatible with grounding systems and resistance testing

Proper joint treatment, adhesive application, copper grounding and substrate flatness are essential for reliable performance.

Seamless cleanroom epoxy flooring in a controlled production facility
Smooth, continuous flooring helps simplify cleaning and reduce locations where dust or contaminants can accumulate.
ESD Flooring Malaysia

What Is the Difference Between Anti-Static, Dissipative and Conductive Flooring?

These terms describe different electrical behaviours and should not be used interchangeably. A project specification should state the required resistance, test method, grounding arrangement and acceptance criteria.

Anti-Static Flooring

Anti-static flooring is generally intended to reduce static charge generation during movement. However, the term alone may not define a measurable resistance range or a complete path to ground.

Static-Dissipative Flooring

Static-dissipative flooring allows accumulated charge to discharge in a controlled manner. It is commonly considered for electronics production, laboratories and other static-sensitive workspaces.

Conductive Flooring

Conductive flooring provides a lower-resistance path for charge to travel to an approved grounding point. It may be required in higher-risk environments, but suitability must be confirmed against the process, safety requirements and applicable project standards.

Important: ESD performance depends on the complete system, including flooring material, adhesive, copper grid or grounding points, footwear, operator practices, environmental conditions and ongoing testing.
Flooring Selection Guide

How Do You Choose the Right Cleanroom Flooring?

The best flooring is the system that matches the actual production environment. The following table provides a practical starting point, but final selection should follow a site assessment and project specification.

Facility or Application Common Flooring Option Main Requirement Items to Confirm
Semiconductor and electronics manufacturing ESD vinyl, static-dissipative or conductive ESD flooring Controlled static dissipation and component protection Resistance range, grounding layout, footwear system and testing method
Pharmaceutical and biotechnology facilities Seamless epoxy or polyurethane flooring Easy cleaning, hygiene and chemical resistance Cleaning chemicals, coving, slip resistance and maintenance procedure
Medical-device production Epoxy, polyurethane or ESD flooring, depending on the process Contamination control and production reliability Equipment sensitivity, traffic, cleaning frequency and particle control
Heavy equipment and chemical process areas Heavy-duty epoxy or specialised resin flooring Load, impact, abrasion and chemical resistance Machine weight, point loads, chemical exposure and substrate strength
Existing production-area renovation System selected according to current substrate and shutdown period Controlled installation with limited disruption Moisture, contamination, curing time, phasing and temporary access

For projects involving new equipment or production-line changes, flooring work should also be coordinated with the machine facilities hook-up and process utility installation to avoid unnecessary cutting, patching or rework.

Installation Scope

What Is Included in Cleanroom Flooring Installation?

EEPS approaches flooring as an engineering and installation package rather than a material-only supply. The scope can include assessment, preparation, installation, ESD grounding, testing and project handover.

1

Site Assessment

Review the room use, process risk, equipment, traffic, cleaning methods, shutdown constraints and expected flooring performance.

2

Subfloor and Moisture Assessment

Inspect the existing concrete or flooring for moisture, cracks, contamination, uneven areas, weak surfaces and previous coating failures.

3

System Recommendation

Select the appropriate primer, flooring build-up, finish, thickness, ESD category, colour and detailing according to the operating environment.

4

Surface Preparation

Prepare the substrate by removing weak material, dirt, oil, old coatings and surface irregularities. Cracks and damaged areas are repaired as required.

5

Grounding and Installation

Install the specified flooring system. For ESD applications, grounding components and conductive pathways are incorporated according to the agreed design.

6

Inspection, Testing and Handover

Conduct visual inspection and relevant performance checks. Where included in the scope, ESD resistance results and handover documentation are recorded for the client.

Integrated Cleanroom Planning

Why Should Flooring Be Planned with the Entire Cleanroom?

Flooring interacts with wall panels, coving, doors, machine bases, utility routes, drainage, personnel movement and cleaning procedures. Planning these elements separately can create joints, inaccessible areas, damaged finishes or avoidable modification work.

During a new cleanroom or renovation project, EEPS can coordinate flooring with the wider cleanroom design and engineering scope . This supports better sequencing and ensures that flooring is installed at an appropriate stage of the construction programme.

Air cleanliness and floor cleanliness also perform different functions. Flooring helps reduce contamination traps and supports cleaning, while airborne particle control requires suitable HVAC, airflow and filtration. Facilities requiring these systems can review our cleanroom filtration and clean bench solutions .

After the cleanroom has been completed, environmental performance may also need to be verified. EEPS provides cleanroom testing and certification services for parameters such as particle concentration, airflow, pressure differentials and filtration performance.

Cleanroom flooring, static control and contamination management illustration by EEPS Engineering
Cleanroom flooring should be coordinated with equipment, personnel flow, filtration, wall systems and utility requirements.
Industries We Serve

Cleanroom Flooring for Critical Malaysian Industries

Flooring requirements vary significantly between industries. EEPS considers the actual production process instead of applying one standard system to every facility.

Semiconductor

ESD-controlled flooring for wafer fabrication, testing, assembly, packaging and other static-sensitive production areas.

Electronics Manufacturing

Static-dissipative or conductive flooring for component assembly, technical rooms and sensitive equipment areas.

Pharmaceutical

Seamless, cleanable flooring for production, preparation, packaging and controlled support spaces.

Medical Devices

Hygienic and durable flooring for controlled assembly, inspection, packaging and manufacturing environments.

Biotechnology and Laboratories

Easy-to-clean flooring selected around chemical exposure, laboratory traffic and contamination control procedures.

Industrial Production

Heavy-duty resin flooring for equipment loads, abrasion, trolley movement, chemical exposure and demanding operating conditions.

Existing Floor Assessment

When Should You Repair or Replace Cleanroom Flooring?

A flooring assessment is recommended when damage, cleaning difficulty or electrical performance begins to affect daily operations.

  • Visible cracks, peeling or delamination
  • Uneven or damaged joints that trap dirt
  • Repeated coating failure in the same location
  • Dust generation from worn flooring
  • ESD resistance results outside the required range
  • Damage caused by chemicals, impact or heavy equipment
  • Difficulty maintaining the required cleaning condition
  • Production expansion or installation of new machinery

Avoid Coating Over an Unverified Substrate

Applying a new coating directly over a damp, weak, contaminated or poorly bonded surface can lead to bubbling, loss of adhesion and early failure. Proper diagnosis and preparation are essential before installing a new system.

For an operating production area, EEPS can discuss phased installation, access control and curing requirements to reduce disruption. The practical solution may involve local repair, partial replacement or full resurfacing, depending on the floor condition.

Cleanroom Flooring Contractor Selangor

Why Choose EEPS Engineering?

EEPS provides cleanroom, mechanical, electrical and civil engineering support for industrial and controlled-environment facilities in Selangor, Kuala Lumpur and other locations in Malaysia.

Engineering-Based Assessment

Recommendations consider the substrate, process, equipment, traffic, cleaning and performance requirements.

Multiple Flooring Options

Solutions can include epoxy, polyurethane, ESD vinyl and specialist static-control flooring.

Integrated Project Coordination

Flooring can be coordinated with cleanroom panels, HVAC, utilities, equipment and renovation work.

Testing and Documentation

Where specified, the project scope can include ESD resistance testing and handover records.

View selected EEPS engineering projects to understand the company's wider experience in industrial, cleanroom, electrical and mechanical works.

Related Cleanroom Services

Additional Engineering Support for Your Facility

Many flooring projects form part of a larger cleanroom installation, facility upgrade or production expansion. EEPS can coordinate related systems to reduce interface issues between contractors.

Cleanroom System

Cleanroom wall panels, ceilings, doors, air showers, pass boxes, HVAC and controlled access systems.

Explore cleanroom systems →

Filtration and Clean Bench

FFU, HEPA filtration, clean bench and airflow solutions for contamination-sensitive processes.

View filtration solutions →

Cleanroom Testing

Particle-count, airflow, pressure-differential and filtration-performance testing for cleanrooms.

View testing services →

Machine Facilities Hook-Up

Process utility, electrical, HVAC, compressed-air, vacuum and equipment connection services.

View hook-up services →
Frequently Asked Questions

Cleanroom Flooring System Malaysia FAQ

These answers cover common questions from semiconductor, electronics, pharmaceutical and industrial facility owners.

Anti-static flooring generally reduces static generation, while static-dissipative and conductive systems provide defined paths for electrical charge to travel to ground. The correct system depends on the required resistance range, equipment sensitivity and project specification.

Neither option is automatically better. Seamless epoxy is often selected for hygiene, durability and chemical resistance. ESD vinyl is commonly used where controlled static dissipation, consistent electrical performance and replaceable tiles are priorities.

Yes, subject to substrate condition, available shutdown time, access and contamination controls. Existing coatings, moisture, cracks and operational traffic must be assessed before planning a phased installation.

ESD resistance testing and related handover records can be included where required by the agreed project scope. Testing criteria should be confirmed before installation so the flooring, grounding layout and acceptance method are aligned.

Semiconductor cleanrooms commonly use ESD vinyl, static-dissipative resin or conductive flooring. Selection depends on component sensitivity, required resistance, production process, traffic, equipment loads and the facility's ESD control programme.

In Summary,

the right cleanroom flooring system supports contamination control, static management, cleaning, workplace safety and long-term facility reliability. ESD vinyl and conductive flooring are commonly used for static-sensitive semiconductor and electronics environments, while seamless epoxy or polyurethane systems are practical for pharmaceutical, laboratory and heavy-duty cleanroom applications.

A successful installation starts with an assessment of the existing subfloor, production process, resistance requirements, chemical exposure, traffic and equipment loading. EEPS Engineering can support the project from flooring selection and surface preparation through installation, grounding, testing and integration with the wider cleanroom facility.

Discuss Your Cleanroom Flooring Project with EEPS

Send us your facility location, floor area, existing floor condition, intended process and ESD requirements. Our team will review the available information and discuss a suitable next step for your cleanroom flooring project in Malaysia.

EEPS Engineering Sdn Bhd
40, Jalan Melor 7, Kawasan Perusahaan Batu 10, Telok Panglima Garang, 42500 Jenjarom, Selangor, Malaysia.

Contact EEPS Engineering
Epoxy Flooring Malaysia Industrial Cleanroom Flooring KL & Selangor ISO Cleanroom Flooring Malaysia
View Cleanroom Flooring System details on official website Know more about this service. More Details
EEPS Engineering Sdn Bhd Logo
EEPS Engineering Sdn Bhd Malaysia
Contact us Malaysia flagMalaysia